What is the Dahua VTM126 used for?

The VTM126 is the silver three-module front panel for Dahua’s VTO4202F-X modular video-intercom system. It surrounds and aligns three compatible modules in one vertical entrance assembly and is designed to be fitted over the separate VTM128 mounting box. Camera, keypad, card-reader, display, call-button and other functional modules must be selected separately according to the required intercom design.

Which Dahua products are compatible with the VTM126?

Dahua officially lists the VTM126 as applicable to the VTO4202F-X modular door-station series and specifies that it is used with the VTM128 three-module mounting box. It should not be treated as a universal trim panel for unrelated villa or apartment stations. Confirm that every selected camera, keypad, card-reader, display or call-button module belongs to the approved VTO4202F-X architecture.

How many intercom modules can the VTM126 hold?

The panel provides a single vertical opening for three compatible VTO4202F-X modules. This allows installers to combine functions such as video calling, keypad access, card reading, directory display or apartment call buttons, subject to system compatibility. It does not create extra module positions beyond three, so the final functional combination should be planned before the mounting box and panel are ordered.

What are the dimensions of the VTM126 panel?

The official dimensions are 140mm wide, 340.4mm high and 7mm deep. Check the complete wall area before installation, including the VTM128 mounting box, module clearances, cable routing and any required sealant. The front panel is slightly larger than the rear box so it can cover the enclosure edges and provide a clean finished appearance around the three installed modules.

What material and colour is the VTM126?

The VTM126 is made from aluminium and has a silver finish. The slim 7mm front frame provides a coordinated appearance with compatible Dahua modular intercom components. Outdoor durability depends on the completed assembly, selected modules, mounting box, surface preparation and sealing rather than the panel alone. Coastal, industrial or highly exposed entrances may require additional corrosion inspection and maintenance.

Is the VTM128 mounting box included with the VTM126?

No. Dahua identifies the VTM126 as a three-module panel used with the VTM128 mounting box, which means the rear enclosure is a separate component unless a supplier explicitly packages them together. The functional VTO4202F-X modules are also separate. Check the complete bill of materials so the panel, box, modules, power equipment, network components and installation hardware are all included.

Does the VTM126 have its own IP weatherproof rating?

Dahua’s official VTM125/VTM126 datasheet does not publish a standalone IP rating for the front panel. Weather resistance depends on the completed VTO4202F-X assembly, compatible modules, VTM128 box, wall preparation, cable entry, drainage and sealant. The panel should not be described as a waterproof enclosure by itself. Follow the installation requirements for the selected modules and the completed entrance station.

What should I confirm before ordering this three-module panel?

Confirm that the project uses VTO4202F-X modules, requires exactly three module positions and includes the matching VTM128 mounting box. Review the intended module order, wall area, mounting method, cable route and environmental sealing before installation. Security Wholesalers can assist with checking whether the selected camera, keypad, card-reader or call-button modules form a complete compatible three-module entrance station.

Dahua DH-VTM126 3-Module Aluminium Panel for VTO4202F-X Door Stations

$97.00

WARRANTY GUARANTEED

✔ Dedicated 5★ Customer Care Team ✔ Fast & Responsive Tech Support

Dahua 3-Module Aluminium Panel | DH-VTM126 | VTO4202F-X Door Station Accessory | Modular Intercom Panel | Entry-Control Installation

The Dahua DH-VTM126 delivers a 3-module aluminium panel designed for compatible Dahua VTO4202F-X modular video intercom door station installations. Featuring a purpose-built three-module layout and aluminium construction, it supports neat front-panel presentation for multi-module intercom entry systems.

It also provides a professional modular accessory, making this panel available at Security Wholesalers practical for apartments, offices, commercial buildings and controlled-entry projects. Its 3-module format suits new intercom installations, door station upgrades and access-control setups where clean module alignment, durable presentation and compatible housing support are important.

Key Features

3-Module Panel Design: Supports compatible three-module Dahua VTO4202F-X video intercom door station configurations.
Aluminium Construction: Provides durable front-panel support for professional intercom installations.
Modular Door Station Support: Suits compatible Dahua modular video intercom entry systems.
Clean Installation Finish: Helps present door station modules neatly at building entry points.
Entry-Control Accessory: Fits apartments, offices and commercial access-control projects.
Professional Intercom Setup: Supports new installations, upgrades and compatible modular door station layouts.

Additional Information

Dahua DH-VTM125VTM126 Datasheet

$97.00 inc GST +3 Year Warranty & Support

Description

Product SKU: DH-VTM126

Product Overview

The Dahua DH-VTM126 VTM126 is a silver aluminium three-module front panel designed for VTO4202F-X modular video-intercom door stations. It provides the visible outer frame for three compatible modules arranged in one vertical column and is intended to be installed with the separately supplied VTM128 three-module mounting box. The panel measures 140 × 340.4 × 7mm, providing a slim border around approved camera, keypad, card-reader, display or call-button modules. Functional intercom modules, rear mounting box, power, network equipment and installation hardware are not included unless separately stated. Dahua does not publish a standalone IP rating, operating-temperature range or product weight for this panel.

Key Capabilities

Three-Module Front Panel

Provides the finished external frame for three compatible VTO4202F-X intercom modules arranged in one vertical column.

VTM128 Box Compatibility

Designed to fit the matching Dahua VTM128 three-module mounting box for a complete enclosure and panel assembly.

VTO4202F-X Modular System

Supports approved camera, keypad, card-reader, display and call-button modules selected from the compatible modular intercom range.

Slim 7mm Profile

The 7mm-deep aluminium frame creates a neat finished border around the installed modules without adding unnecessary projection.

Silver Aluminium Finish

Aluminium construction and a silver appearance coordinate with compatible Dahua modular entrance-station components.

Purpose-Built Alignment

The 140 × 340.4mm format keeps three modules aligned and covers the edges of the corresponding rear mounting box.

Best For

Three-Module Door Stations: Frames three compatible VTO4202F-X modules in one vertical entrance assembly.
VTM128 Mounting Boxes: Provides the matching visible panel for the three-module rear enclosure.
Custom Intercom Combinations: Supports approved combinations of camera, keypad, card-reader, display and call-button modules.
Surface-Mount Installations: Finishes the assembly when the VTM128 box is mounted on the wall surface.
Flush-Mount Installations: Provides a clean front frame when the matching enclosure is recessed into the wall.

Why Choose the VTM126

The VTM126 is the purpose-built finishing panel for VTO4202F-X projects that require three functional modules in a compact single-column station. Its aluminium construction, slim 7mm profile and silver finish coordinate with the modular intercom range, while the 340.4mm height provides the correct frame for the matching VTM128 enclosure. Selecting the official panel avoids relying on improvised trim or incompatible module spacing. Supplied by Security Wholesalers, it should be ordered only after confirming the VTM128 box, exact module combination, installation method, cable route and completed weather-sealing requirements.

Buyer Decision Tips

System-Completeness Tip: The VTM126 is only the front panel. Include the VTM128 mounting box and all required VTO4202F-X functional modules, power and network components in the project bill of materials.

Module-Planning Tip: Decide the exact three-module order before installation. Camera height, keypad access, directory readability and visitor reach should guide how the modules are arranged.

Key Features & Technical Specifications

Product SKU	DH-VTM126
Official Model	VTM126
Product Type	Three-module aluminium front panel for a modular video-intercom door station.
Module Capacity	3 compatible module positions.
Compatible Product Series	Dahua VTO4202F-X modular door-station series.
Matching Mounting Box	VTM128 three-module mounting box, sold separately unless explicitly packaged.
Material	Aluminium.
Appearance Colour	Silver.
Dimensions	140 × 340.4 × 7mm (W × H × D).
Module Orientation	Vertical three-module arrangement.
Mounting Box Included	No; the VTM128 box is a separate component unless explicitly included in a package.
Intercom Modules Included	No; compatible VTO4202F-X functional modules are selected separately.
Standalone IP Rating	Not stated in the official VTM125/VTM126 datasheet.
Operating Temperature	Not stated in the official VTM125/VTM126 datasheet.
Product Weight	Not stated in the official VTM125/VTM126 datasheet.

Ideal Use Cases

Apartment Entrance Stations

Finishes a three-module assembly containing compatible calling, access and information modules from the VTO4202F-X range.

Commercial Reception Entries

Creates a professional front frame for a modular video station combining visitor calling with keypad or card access.

Access-Control Entrances

Supports approved combinations of camera, keypad and card-reader modules within one organised vertical panel.

Multi-Resident Call Stations

Can frame compatible display or button modules used to direct calls to apartments, offices or managed reception points.

Surface-Mount Assemblies

Works with a surface-installed VTM128 box where a recessed wall cavity is unavailable or undesirable.

Flush-Mount Assemblies

Provides the visible front finish when the VTM128 enclosure is recessed into a correctly prepared wall opening.

Choosing the Right Model

Choose the VTM126 if: The entrance requires three compatible VTO4202F-X modules and a matching VTM128 mounting box.
Choose the VTM125 if: Only two compatible modules are required with the VTM127 mounting box.
Choose a larger modular panel if: The project needs more than three module positions or multiple columns.
Confirm the final module order: Position video, keypad, card-reader and call-button functions for accessibility and camera coverage.
Confirm the complete enclosure: The panel does not replace the VTM128 rear box or provide a standalone sealed housing.

FAQs

What is the Dahua VTM126 used for?
The VTM126 is the silver three-module front panel for Dahua’s VTO4202F-X modular video-intercom system. It surrounds and aligns three compatible modules in one vertical entrance assembly and is designed to be fitted over the separate VTM128 mounting box. Camera, keypad, card-reader, display, call-button and other functional modules must be selected separately according to the required intercom design.
Which Dahua products are compatible with the VTM126?
Dahua officially lists the VTM126 as applicable to the VTO4202F-X modular door-station series and specifies that it is used with the VTM128 three-module mounting box. It should not be treated as a universal trim panel for unrelated villa or apartment stations. Confirm that every selected camera, keypad, card-reader, display or call-button module belongs to the approved VTO4202F-X architecture.
How many intercom modules can the VTM126 hold?
The panel provides a single vertical opening for three compatible VTO4202F-X modules. This allows installers to combine functions such as video calling, keypad access, card reading, directory display or apartment call buttons, subject to system compatibility. It does not create extra module positions beyond three, so the final functional combination should be planned before the mounting box and panel are ordered.
What are the dimensions of the VTM126 panel?
The official dimensions are 140mm wide, 340.4mm high and 7mm deep. Check the complete wall area before installation, including the VTM128 mounting box, module clearances, cable routing and any required sealant. The front panel is slightly larger than the rear box so it can cover the enclosure edges and provide a clean finished appearance around the three installed modules.
What material and colour is the VTM126?
The VTM126 is made from aluminium and has a silver finish. The slim 7mm front frame provides a coordinated appearance with compatible Dahua modular intercom components. Outdoor durability depends on the completed assembly, selected modules, mounting box, surface preparation and sealing rather than the panel alone. Coastal, industrial or highly exposed entrances may require additional corrosion inspection and maintenance.
Is the VTM128 mounting box included with the VTM126?
No. Dahua identifies the VTM126 as a three-module panel used with the VTM128 mounting box, which means the rear enclosure is a separate component unless a supplier explicitly packages them together. The functional VTO4202F-X modules are also separate. Check the complete bill of materials so the panel, box, modules, power equipment, network components and installation hardware are all included.
Does the VTM126 have its own IP weatherproof rating?
Dahua’s official VTM125/VTM126 datasheet does not publish a standalone IP rating for the front panel. Weather resistance depends on the completed VTO4202F-X assembly, compatible modules, VTM128 box, wall preparation, cable entry, drainage and sealant. The panel should not be described as a waterproof enclosure by itself. Follow the installation requirements for the selected modules and the completed entrance station.
What should I confirm before ordering this three-module panel?
Confirm that the project uses VTO4202F-X modules, requires exactly three module positions and includes the matching VTM128 mounting box. Review the intended module order, wall area, mounting method, cable route and environmental sealing before installation. Security Wholesalers can assist with checking whether the selected camera, keypad, card-reader or call-button modules form a complete compatible three-module entrance station.

Compatible Accessories

VTM128 – Required matching three-module mounting box.
VTO4202F-X Series Modules – Compatible functional modules selected according to the required intercom configuration.

Additional Information

Dahua DH-VTM125VTM126 Datasheet

SKU: DH-VT‌M126 Categories: Dahua, Dahua Accessories