What is the Dahua DH-PFB121W wall bracket used for?

The DH-PFB121W is an adjustable wall-mount accessory for selected compatible Dahua security cameras. It provides a supported mounting point that can rotate horizontally and tilt vertically so the camera can be aimed towards the required scene. The bracket is an accessory only and does not include a camera, lens, recorder, power supply, network cable or installation service.

Which Dahua cameras are compatible with the PFB121W?

Compatibility must be checked against Dahua’s current Camera Accessories Selection information for the exact camera model. The DH-PFB121W has a specific mounting interface and a maximum 1kg load rating, so it should not be treated as a universal bracket for every Dahua camera. Confirm the camera, lens, housing and total supported weight before ordering.

How far can the bracket rotate?

The bracket supports horizontal rotation from 0° to 360°, allowing a compatible camera to be aimed in any direction around the mounting axis. The final usable angle depends on the camera body, lens, cable route, nearby walls and other obstructions. Tighten all adjustment points correctly after aiming so the camera remains stable during normal operation and servicing.

What vertical adjustment does the PFB121W provide?

Dahua specifies an adjustable inclination range from –60° to 0°. This allows a compatible camera to be angled downward from the level position for wall-mounted surveillance. The selected angle should maintain the required field of view without placing excessive strain on cables or connectors. Confirm that the camera body and lens remain clear of the wall throughout adjustment.

How much weight can the PFB121W support?

The DH-PFB121W has a specified maximum load-bearing capacity of 1kg. The combined weight of the camera, lens, housing and any supported accessories must remain within this limit. The wall, anchors and fasteners must also safely support the complete assembly. Dynamic movement, vibration, wind exposure and an unsuitable mounting surface can reduce installation reliability.

Is the Dahua PFB121W weatherproof?

Dahua specifies operation from –40 °C to +60 °C and lists basic anti-corrosion protection, but the official specification does not state an IP weatherproof rating for the bracket. Outdoor suitability depends on the compatible camera, cable sealing, fasteners, mounting surface and exposure level. Do not assume the bracket alone provides a certified waterproof enclosure or corrosion-resistant marine-grade installation.

Does the bracket conceal the camera cables?

The official PFB121W specification describes an adjustable wall mount but does not state that it has a fully concealed or hidden-cable design. Cable routing should be planned around the compatible camera, wall penetration, conduit and weather-sealing requirements. Secure cables so they do not interfere with the 360° rotation or vertical adjustment and cannot be pulled or damaged during servicing.

What should I confirm before ordering this wall bracket?

Confirm the exact camera model, total assembly weight, required viewing angle, wall material and cable route. Also check that the 190 × 58 × 89.5mm bracket fits the installation area and that suitable anchors are available for the surface. Security Wholesalers can assist with checking the PFB121W against the selected Dahua camera and mounting arrangement.

Dahua DH-PFB121W Aluminium Adjustable Wall Mount Bracket with 360° Rotation

$13.50

WARRANTY GUARANTEED

✔ Dedicated 5★ Customer Care Team ✔ Fast & Responsive Tech Support

Dahua Aluminium Adjustable Wall Mount Bracket | DH-PFB121W | 360° Rotation | Security Camera Accessory | Flexible Camera Mounting

The Dahua DH-PFB121W delivers an aluminium adjustable wall mount bracket designed for compatible Dahua security camera installations requiring flexible positioning and secure support. Featuring a 360° rotation design and durable aluminium construction, it helps installers achieve a suitable camera angle while maintaining a clean wall-mounted finish.

It also provides a purpose-built mounting accessory, making this bracket available at Security Wholesalers practical for residential, commercial and industrial CCTV projects. Its adjustable format suits new camera installations, replacements and upgrades where stable mounting, improved alignment and professional camera placement are important.

Key Features

Adjustable Wall Mount Design: Supports flexible positioning for compatible Dahua security cameras.
360° Rotation: Allows camera angle adjustment to suit the required viewing direction.
Aluminium Construction: Provides durable support for professional CCTV installations.
Camera Mounting Support: Suits compatible Dahua cameras requiring a stable wall-mounted accessory.
Clean Installation Finish: Helps present the camera neatly while supporting organised placement.
Professional Installation Accessory: Fits new surveillance projects, camera replacements and compatible system upgrades.

Additional Information

Dahua DH-PFB121W Datasheet

$13.50 inc GST +3 Year Warranty & Support

Description

Product SKU: DH-PFB121W

Product Overview

The Dahua DH-PFB121W is a compact aluminium-alloy wall bracket designed for selected compatible Dahua security cameras requiring precise directional adjustment. Its mounting head rotates through 360° horizontally and tilts from –60° to 0° vertically, allowing installers to aim the camera towards entrances, internal areas, counters or perimeter approaches. The white bracket measures 190 × 58 × 89.5mm and supports a complete camera assembly weighing up to 1kg. Dahua specifies operation from –40 °C to +60 °C with basic anti-corrosion protection. No IP weatherproof rating or fully concealed cable pathway is stated, so camera compatibility, cable routing, fixings and environmental suitability must be confirmed before installation.

Key Capabilities

360° Horizontal Rotation

The mounting head can rotate through a full 360°, allowing a compatible camera to be aimed in the required horizontal direction.

–60° to 0° Vertical Adjustment

The bracket provides controlled downward inclination for wall-mounted cameras that need to cover entrances, approaches, counters or internal areas.

Aluminium-Alloy Construction

The white aluminium-alloy body provides a lightweight and rigid mounting platform for selected compatible Dahua cameras.

Compact Wall-Mount Design

Dimensions of 190 × 58 × 89.5mm support professional camera positioning without the bulk of a large PTZ or pendant bracket.

1kg Load Capacity

The bracket supports compatible camera, lens and accessory assemblies weighing up to 1kg when fixed to a suitable structural surface.

Wide Operating Temperature

Specified operation from –40 °C to +60 °C supports varied environments, subject to camera compatibility and correct environmental installation.

Best For

Compatible Dahua Cameras: Provides an adjustable wall-mount solution for selected models listed in Dahua’s accessory-selection information.
Precision Camera Aiming: Full horizontal rotation and downward tilt help installers frame the required surveillance area.
Lightweight Camera Assemblies: Supports compatible camera, lens and accessory combinations weighing up to 1kg.
Commercial Indoor Sites: Suits offices, shops, warehouses, reception areas and service counters requiring a compact wall bracket.
Camera Upgrade Projects: Provides flexible repositioning when a compatible camera is being added or replaced on a structural wall.

Why Choose the DH-PFB121W

The DH-PFB121W gives installers more aiming flexibility than a fixed camera base while remaining compact and lightweight. Its 360° horizontal rotation makes it easier to orient a compatible camera along almost any wall-facing direction, while the –60° vertical range supports practical downward coverage from an elevated mounting point. Aluminium-alloy construction, a white finish and a 1kg load rating suit selected professional camera assemblies without the bulk of a heavy PTZ bracket. Supplied by Security Wholesalers, this model should be selected only after confirming the exact camera, lens, total weight, cable route and mounting-surface requirements.

Buyer Decision Tips

Compatibility Tip: Check the exact camera model against Dahua’s current Camera Accessories Selection information. A camera that physically appears small enough may still use a different mounting interface.

Load and Cable Tip: Keep the complete assembly below 1kg and route cables so they do not restrict rotation, strain connectors or interfere with the selected vertical angle.

Key Features & Technical Specifications

Model	DH-PFB121W
Product Type	Adjustable aluminium camera wall-mount bracket.
Casing Material	Aluminium alloy.
Appearance Colour	White.
Installation Method	Wall mount.
Horizontal Rotation	0° to 360°.
Vertical Inclination	–60° to 0°.
Product Dimensions	190.0 × 58.0 × 89.5mm (L × W × H).
Net Weight	0.25kg.
Gross Weight	0.31kg.
Maximum Load	1.0kg.
Operating Temperature	–40 °C to +60 °C.
Operating Humidity	Below 90% relative humidity.
Storage Temperature	–40 °C to +60 °C.
Storage Humidity	10%–90% relative humidity.
Anti-Corrosion Level	Basic protection.
Weatherproof Rating	No IP rating is stated in the official product specification.
Packaging Dimensions	195 × 61 × 98mm (L × W × H).
Camera Compatibility	Selected Dahua cameras only; verify against the current Camera Accessories Selection information.

Ideal Use Cases

Box Camera Installations

Provides an adjustable wall position for selected compatible box cameras and lens combinations that remain within the 1kg load limit.

Entrances and Doorways

The downward tilt range helps aim a compatible camera towards access points, reception areas and pedestrian approaches.

Retail and Service Counters

Useful where the camera needs precise horizontal and vertical aiming from a wall rather than direct ceiling mounting.

Warehouses and Workshops

Supports selected lightweight camera assemblies overlooking work areas, internal doors, aisles or equipment zones.

Camera Retrofit Projects

Can provide a new adjustable mount when replacing a compatible camera and retaining an existing structural wall position.

Temporary Aiming Adjustments

The wide rotation range allows installers to fine-tune a compatible camera during commissioning before securely locking the final position.

Choosing the Right Model

Choose the DH-PFB121W if: The selected Dahua camera is compatible, weighs less than 1kg with its lens and requires 360° horizontal adjustment.
Choose a junction box if: Cable connectors and excess cable need to be enclosed behind the camera.
Choose a heavier bracket if: The camera, lens, housing or accessories exceed the 1kg maximum load.
Choose an IP-rated mounting solution if: The bracket itself must have a stated weatherproof certification for an exposed location.
Confirm vertical coverage: The bracket tilts downward from 0° to –60° and does not provide an upward positive tilt range.

FAQs

What is the Dahua DH-PFB121W wall bracket used for?
The DH-PFB121W is an adjustable wall-mount accessory for selected compatible Dahua security cameras. It provides a supported mounting point that can rotate horizontally and tilt vertically so the camera can be aimed towards the required scene. The bracket is an accessory only and does not include a camera, lens, recorder, power supply, network cable or installation service.
Which Dahua cameras are compatible with the PFB121W?
Compatibility must be checked against Dahua’s current Camera Accessories Selection information for the exact camera model. The DH-PFB121W has a specific mounting interface and a maximum 1kg load rating, so it should not be treated as a universal bracket for every Dahua camera. Confirm the camera, lens, housing and total supported weight before ordering.
How far can the bracket rotate?
The bracket supports horizontal rotation from 0° to 360°, allowing a compatible camera to be aimed in any direction around the mounting axis. The final usable angle depends on the camera body, lens, cable route, nearby walls and other obstructions. Tighten all adjustment points correctly after aiming so the camera remains stable during normal operation and servicing.
What vertical adjustment does the PFB121W provide?
Dahua specifies an adjustable inclination range from –60° to 0°. This allows a compatible camera to be angled downward from the level position for wall-mounted surveillance. The selected angle should maintain the required field of view without placing excessive strain on cables or connectors. Confirm that the camera body and lens remain clear of the wall throughout adjustment.
How much weight can the PFB121W support?
The DH-PFB121W has a specified maximum load-bearing capacity of 1kg. The combined weight of the camera, lens, housing and any supported accessories must remain within this limit. The wall, anchors and fasteners must also safely support the complete assembly. Dynamic movement, vibration, wind exposure and an unsuitable mounting surface can reduce installation reliability.
Is the Dahua PFB121W weatherproof?
Dahua specifies operation from –40 °C to +60 °C and lists basic anti-corrosion protection, but the official specification does not state an IP weatherproof rating for the bracket. Outdoor suitability depends on the compatible camera, cable sealing, fasteners, mounting surface and exposure level. Do not assume the bracket alone provides a certified waterproof enclosure or corrosion-resistant marine-grade installation.
Does the bracket conceal the camera cables?
The official PFB121W specification describes an adjustable wall mount but does not state that it has a fully concealed or hidden-cable design. Cable routing should be planned around the compatible camera, wall penetration, conduit and weather-sealing requirements. Secure cables so they do not interfere with the 360° rotation or vertical adjustment and cannot be pulled or damaged during servicing.
What should I confirm before ordering this wall bracket?
Confirm the exact camera model, total assembly weight, required viewing angle, wall material and cable route. Also check that the 190 × 58 × 89.5mm bracket fits the installation area and that suitable anchors are available for the surface. Security Wholesalers can assist with checking the PFB121W against the selected Dahua camera and mounting arrangement.

Additional Information

Dahua DH-PFB121W Datasheet

SKU: DH-PFB‌121W Categories: Dahua, Dahua Accessories