Product SKU: DS-PDB-EX-SBKT
Product Overview
The Hikvision DS-PDB-EX-SBKT is a swivel wall-mount bracket designed for compatible Hikvision outdoor PIR and dual-technology intrusion detectors. It allows the mounted detector to be adjusted from -10° to 30° vertically and ±45° horizontally, giving installers greater control over the final detection direction after the wall position has been selected. This is particularly useful where the detector cannot face the required area when fixed flat against the mounting surface. The bracket uses a compact PC housing and measures 67.3 mm × 33 mm × 73.5 mm, keeping the completed installation relatively discreet. It is best suited to external walls, building corners, side access areas, yards and other locations where a compatible outdoor detector needs angled positioning. The DS-PDB-EX-SBKT is a mounting accessory only and does not include the alarm detector, cabling or separate installation hardware unless specifically supplied.
Key Capabilities
Multi-Angle Detector Positioning
The swivel mechanism allows a compatible detector to be directed horizontally and vertically after wall mounting. This helps align the detector with the intended coverage area when a flat mounting position would point it too far to one side or at the wrong elevation.
Wide Horizontal Adjustment
Horizontal adjustment of ±45° gives installers practical flexibility when covering side access paths, angled walls, corners or entry approaches. The final position should still follow the detector’s own coverage pattern and installation instructions.
Controlled Vertical Alignment
Vertical adjustment from -10° to 30° allows the mounted detector to be tilted to suit the selected wall height and target area. This can help compensate for installations where the detector would otherwise aim above or below the required zone.
Compact Wall-Mount Design
The bracket’s compact dimensions keep the installation neat while providing enough articulation for practical detector positioning. Its PC shell also keeps the bracket lightweight at approximately 55 g before the compatible detector is attached.
Best For
- Side Access Areas: Helps angle a compatible outdoor detector along narrow pathways beside homes, offices or commercial buildings.
- Building Corners: Useful where a detector must be directed away from the face of the wall towards an adjoining coverage zone.
- Driveways and Yards: Allows the detector angle to be refined towards the intended approach path or protected outdoor area.
- Uneven Mounting Positions: Provides adjustment where the available wall surface does not naturally face the required detection direction.
- Compatible Outdoor Detectors: Designed for selected Hikvision outdoor PIR and dual-technology detector models.
Why Choose the DS-PDB-EX-SBKT
The DS-PDB-EX-SBKT is useful when a compatible outdoor detector needs more positioning flexibility than direct wall mounting can provide. Its adjustable swivel design helps installers aim the detector towards a driveway, side path, yard or perimeter area without relocating the entire wall fixing point. The horizontal and vertical adjustment ranges also make it easier to refine coverage after the detector is physically installed. Available through Security Wholesalers, this bracket is best selected as a purpose-matched accessory for confirmed Hikvision outdoor detector models rather than treated as a universal alarm bracket. It does not add detection range or change the detector’s sensing performance, so the final angle, mounting height and coverage pattern must still follow the instructions for the connected detector.
Buyer Decision Tips
Buyer Tip: Confirm the exact detector model before ordering. The DS-PDB-EX-SBKT is intended for selected Hikvision outdoor PIR and dual-technology detectors and should not be assumed to fit unrelated indoor sensors or different detector families.
Buyer Tip: Use the bracket only to refine detector direction. The selected wall height, coverage distance and final angle must still comply with the detector’s own installation guide so the adjustment does not create blind spots, excessive ground coverage or unwanted alarm zones.
Key Features & Technical Specifications
| Product Type |
Swivel wall-mount bracket for compatible outdoor intrusion detectors. |
| Primary Use |
Provides adjustable wall mounting for selected Hikvision outdoor PIR and dual-technology detectors. |
| Horizontal Adjustment |
±45°. |
| Vertical Adjustment |
-10° to 30°. |
| Installation Method |
Wall mounting. |
| Shell Material |
PC. |
| Dimensions |
67.3 mm × 33 mm × 73.5 mm. |
| Weight |
Approximately 55 g. |
| Compatible Detector Types |
Selected Hikvision outdoor PIR and dual-technology detectors. |
| Listed Compatible Models |
DS-PDC10DM-VG3, DS-PDP18-HM-WB, DS-PDC10AM-EG2-WB, DS-PDC10DM-EG2-WE, DS-PDP18-HM-WE, DS-PDC10AM-VG3 and DS-PDC10AM-EG2-WE. |
| Detector Included |
No detector is stated as included. |
| Accessory Function |
Changes detector mounting direction without altering the detector’s sensing specification. |
Ideal Use Cases
Side Pathways
Angles a compatible detector along narrow side access areas where direct wall mounting would face across the path.
Driveway Approaches
Helps direct an outdoor detector towards a vehicle or pedestrian approach rather than straight out from the wall.
Building Corners
Provides additional aiming flexibility when the required detection area sits around or beside a structural corner.
Warehouse Perimeters
Allows compatible detectors to be directed towards loading zones, external walkways or yard boundaries.
Residential Yards
Useful where the available wall position requires horizontal or downward adjustment to cover the intended outdoor area.
Retrofit Detector Installations
Helps refine detector alignment when existing cable entry points or wall locations limit the available mounting position.
Choosing the Right Model
- Choose this bracket if: A compatible Hikvision outdoor detector needs adjustable horizontal and vertical wall mounting.
- Choose direct wall mounting if: The detector already faces the required area without additional angle adjustment.
- Choose a different bracket if: The detector model is not listed as compatible or the project requires ceiling, pole or specialised corner mounting.
- Confirm the detector layout first if: The required angle approaches the bracket’s adjustment limits or may conflict with the detector’s specified coverage pattern.
FAQs
- Which detectors are compatible with the Hikvision DS-PDB-EX-SBKT?
The DS-PDB-EX-SBKT is designed for compatible Hikvision outdoor PIR and dual-technology detectors. Hikvision lists models such as the DS-PDC10DM-VG3, DS-PDP18-HM-WB, DS-PDC10AM-EG2-WB, DS-PDC10DM-EG2-WE, DS-PDP18-HM-WE, DS-PDC10AM-VG3 and DS-PDC10AM-EG2-WE. Confirm the exact detector model before ordering because bracket compatibility should not be assumed across unrelated indoor or outdoor detector ranges.
- How much adjustment does the DS-PDB-EX-SBKT provide?
The DS-PDB-EX-SBKT provides vertical adjustment from -10° to 30° and horizontal adjustment of ±45°. This allows the installer to direct a compatible outdoor detector towards the required coverage area after wall mounting. Final detector alignment should still follow the detector’s own mounting height, range and coverage instructions so the bracket angle does not create blind spots or unwanted detection zones.
- Is the DS-PDB-EX-SBKT suitable for wall mounting?
Yes. The DS-PDB-EX-SBKT is specifically designed for wall-mounted installations. Its swivel design allows a compatible detector to be angled horizontally and vertically after the mounting position is selected. The wall surface, fixing method and detector location should be checked before installation so the completed assembly remains secure and the detector maintains the intended field of detection.
- What material is the DS-PDB-EX-SBKT made from?
The DS-PDB-EX-SBKT uses a PC shell and weighs approximately 55 g. The bracket measures 67.3 mm × 33 mm × 73.5 mm. These compact dimensions make it suitable for supporting compatible outdoor detectors without adding excessive bulk, while the installer should still use appropriate wall fixings for the surface and installation environment.
- Does the DS-PDB-EX-SBKT include an alarm detector?
No. The DS-PDB-EX-SBKT is a mounting accessory only and does not include an outdoor PIR or dual-technology detector. It is intended to be used with a compatible Hikvision detector selected separately. Cabling, detector hardware and other installation accessories should only be assumed when they are specifically listed as part of the product package.
- What should be checked before buying the DS-PDB-EX-SBKT?
Confirm the exact detector model, required wall position, desired horizontal and vertical adjustment, mounting surface and available clearance before ordering. The DS-PDB-EX-SBKT is available through Security Wholesalers for compatible Hikvision outdoor detector installations, but it should not be treated as a universal bracket for every alarm sensor or as including the detector itself.
Additional Information
Hikvision DS-PDB-EX-SBKT_Datasheet
