Product SKU: WES1910
© Security Wholesalers Australia. All rights reserved. https://www.securitywholesalers.com.au/product/secor-wes1910-rex-stainless-steel-architrave-exit-button-ip65/
Product Overview
The SECOR WES1910 REX Stainless Steel Architrave Exit Button IP65 is a compact mechanical request-to-exit button designed for compatible access control, door release and egress applications where a narrow architrave plate or standard plate option may be required. It features a stainless steel flush mount button, “PRESS TO EXIT” wording, IP65 rating, isolated normally open and normally closed contacts, and flying leads for straightforward wiring into compatible low-voltage control circuits. The stainless steel button and architrave plate format make it suitable for commercial door frames, narrow mounting areas and access control points requiring a clean, durable finish. With 1 x NO and 1 x NC isolated contacts, 2A maximum current at 12 or 24VDC, ≤50mΩ resistance, greater than 100MΩ insulation resistance and a listed mechanical life of 1 million cycles, the WES1910 is a practical REX button for commercial access control installations.
Key Capabilities
Stainless Steel REX Button
The WES1910 uses a stainless steel flush mount button for a durable, professional request-to-exit finish.
Architrave Plate Option
The architrave plate format suits narrow mounting locations, door frames and compact access control fit-offs.
IP65 Rated Design
The IP65 rating supports suitable installations where protection against dust and water ingress is required.
Isolated NO and NC Contacts
The button provides one isolated normally open contact and one isolated normally closed contact for flexible access control wiring.
Flying Lead Wiring
Flying leads simplify installation and reduce exposed terminal points at the button assembly.
High Mechanical Life
The listed 1 million cycle mechanical life supports repeated operation in suitable commercial access control locations.
Best For
- Request-to-Exit Applications: Suitable for compatible access control systems requiring a stainless steel REX button.
- Architrave Installations: Practical for narrow mounting areas where an architrave plate is preferred.
- Commercial Door Release: Useful for offices, retail sites, warehouses, service areas, schools and controlled internal exits.
- IP65 Button Locations: Suitable for installations requiring a dust and water resistant exit button when installed correctly.
- NO/NC Circuit Wiring: Useful where isolated normally open and normally closed contacts are required for compatible controllers or release circuits.
Why Choose the WES1910
Choose the SECOR WES1910 when the installation needs a stainless steel REX button with IP65 protection, flying leads and flexible plate sizing. Its flush mount stainless steel button provides a clean, durable finish, while the “PRESS TO EXIT” wording helps users clearly identify the door release function. The isolated NO and NC contacts allow connection to compatible request-to-exit inputs, door release circuits and access control systems, with 2A switching capacity at 12 or 24VDC. This model, supplied by Security Wholesalers, is a practical choice for commercial sites requiring a compact architrave-style exit button with reliable mechanical operation.
Buyer Decision Tips
Buyer Tip: Confirm whether the installation requires the standard W70 x H115mm plate size or the narrower W30 x H75mm architrave plate format before ordering or installing.
Buyer Tip: Confirm the connected access controller or release circuit can use isolated NO or NC contact operation and that the circuit remains within the 2A rating at 12 or 24VDC.
Key Features & Technical Specifications
| Product Type |
REX stainless steel architrave exit button / request-to-exit switch. |
| Model |
WES1910. |
| Brand |
SECOR. |
| Button Type |
Stainless steel flush mount button. |
| Plate Type |
Architrave plate; standard plate size also listed in supplied dimensions. |
| Wording |
PRESS TO EXIT. |
| Operation |
Mechanical press-to-exit activation. |
| IP Rating |
IP65. |
| Contacts |
1 x NO and 1 x NC, isolated. |
| Output Type |
Isolated NO and NC contacts. |
| Maximum Current |
2A at 12 or 24VDC. |
| Minimum Current |
5mA. |
| Resistance |
≤50mΩ. |
| Insulation Resistance |
>100MΩ. |
| Electric Life |
50,000 cycles. |
| Mechanical Life |
1 million cycles. |
| Terminals |
Flying leads. |
| Dimensions |
W70 x H115 x D32mm or W30 x H75 x D32mm. |
| Typical Use |
Request-to-exit, door release and compatible access control exit applications requiring mechanical activation. |
Ideal Use Cases
Architrave Exit Points
Use where a compact stainless steel exit button is required on a narrow door frame or wall section.
Commercial Door Release
Suitable for offices, retail sites, warehouses, service areas, schools and controlled access locations.
IP65 Button Locations
Suitable where the installation requires an IP65 rated press-to-exit button, subject to correct mounting and sealing.
NO/NC Access Control Inputs
Can be wired to compatible controllers using isolated normally open or normally closed contact operation.
Stainless Steel Fit-Offs
A practical option where a durable stainless steel button finish is preferred for the exit location.
Flying Lead Wiring
Useful where flying leads are preferred for installation, maintenance or reduced terminal exposure at the button.
Choosing the Right Model
- Choose this model if: You need a stainless steel REX button with IP65 rating, flying leads and isolated NO/NC contacts.
- Choose an LED model if: The installation requires visual LED indication at the exit button location.
- Choose a touchless exit button if: The site requires hand-wave or body approach activation instead of physical press operation.
- Choose a piezo model if: The site requires a finger-touch button with no moving parts rather than a mechanical press button.
- Check before installation: Confirm plate size, mounting depth, flying lead routing, IP65 installation requirements, contact type, current rating and controller input compatibility.
FAQs
- What is the SECOR WES1910 used for?
The SECOR WES1910 is used as a stainless steel request-to-exit button for compatible access control and door release systems. It allows users to physically press the button to request exit through a controlled door.
- Is the WES1910 suitable for architrave installation?
Yes. The supplied product details describe the WES1910 as an architrave plate exit button, and the listed dimensions include W30 x H75 x D32mm as well as W70 x H115 x D32mm. The installer should confirm the required plate format before fitting.
- What contacts does the WES1910 provide?
The WES1910 provides 1 x normally open and 1 x normally closed isolated contact. This gives installers flexibility when connecting the button to compatible request-to-exit inputs or door release circuits.
- Is the WES1910 IP rated?
Yes. The WES1910 is listed with an IP65 rating. Final suitability depends on the installation environment, mounting method, sealing, wiring route and whether the button is protected from conditions beyond its rating.
- Does this model include LED indication?
No LED indication is listed for the WES1910 in the supplied information. If LED status indication is required, choose a compatible illuminated exit button model instead.
- What are the electrical ratings?
The WES1910 is listed with a maximum current of 2A at 12 or 24VDC, minimum current of 5mA, resistance of ≤50mΩ and insulation resistance greater than 100MΩ. The connected circuit should remain within the supplied ratings.
- What size is the WES1910?
The supplied dimensions list W70 x H115 x D32mm or W30 x H75 x D32mm. Installers should confirm the exact plate format, wall space, depth and cable route before fitting the button.
- What should I check before buying the WES1910?
Before buying the WES1910, confirm that your access control system requires a stainless steel REX button, that the NO/NC contacts match the controller input, and that the IP65 rating and selected plate size suit the location. This model is available through Security Wholesalers for compatible access control exit applications.
