SECOR ML02 Blue Waterproof 12VDC High Intensity LED Strobe‍‌​​‌​​‌​​​​‌‌​​​‌‌‍

Product SKU: ML02

Product Overview

The SECOR ML02 Blue Waterproof 12VDC High Intensity LED Strobe is a compact visual alarm indicator designed for compatible hardwired security, access control and alarm applications. It uses a specially designed lens and reflecting mirror with a high intensity blue LED output, helping provide clear visual indication for alarm, access, warning or status signalling. The ML02 operates from 12VDC, draws 50mA and flashes at approximately 80 times per minute, making it suitable for low-voltage systems where a dedicated blue strobe is required. With waterproof construction and two stud mounting, it is a practical choice for installers needing a simple, low-current blue LED strobe for compatible indoor, sheltered or appropriate protected signalling locations.

Key Capabilities

Best For

• Alarm Visual Indication: Suitable for compatible alarm systems requiring a blue visual strobe output.
• Access Control Signalling: Useful for access control applications where a blue LED indicator can show system status or activation.
• Security Warning Applications: A practical visual indicator for low-voltage warning, alert or notification circuits.
• Low-Current Outputs: Suitable where the connected system requires a 12VDC strobe with modest 50mA current draw.
• Installer Replacement Jobs: Useful when replacing or adding a compact waterproof blue LED strobe to a compatible system.

Why Choose the ML02

Choose the SECOR ML02 when the installation needs a simple, compact blue LED strobe for visual alarm, access control or status indication. Its 12VDC operation, 50mA current draw and 80 flashes per minute strobe frequency make it suitable for many compatible low-voltage security outputs, while the specially designed lens and reflecting mirror help improve visibility. Compared with larger siren/strobe devices, the ML02 is focused on visual indication rather than audible alarm output, making it useful where a separate strobe is required. This model, supplied by Security Wholesalers, is a practical choice for compatible systems needing a waterproof blue high intensity LED strobe with straightforward two stud mounting.

Buyer Decision Tips

Key Features & Technical Specifications

Ideal Use Cases

Choosing the Right Model

• Choose this model if: You need a SECOR ML02 blue waterproof LED strobe with 12VDC operation, 50mA current draw and two stud mounting.
• Choose another colour if: The application requires red, amber, green or clear visual indication instead of blue.
• Choose a siren/strobe if: The installation also requires audible alarm output, not just visual strobe indication.
• Check before installation: Confirm output voltage, current capacity, polarity, mounting surface, cable entry, colour requirement and environmental suitability.

FAQs

1. What is the SECOR ML02 used for?
   The SECOR ML02 is used as a blue LED strobe for compatible low-voltage security, alarm and access control systems. It provides visual indication for alarm events, system status, warning signals or other applications where a flashing blue strobe is required.
2. Does the ML02 include a siren?
   No. The ML02 is a visual LED strobe only and does not include a siren or buzzer. If audible output is required, choose a compatible siren, screamer or combo siren/strobe model according to the alarm system’s output capacity and installation requirements.
3. What voltage does the ML02 require?
   The ML02 blue strobe operates from 12VDC. The installer should confirm that the connected alarm, access control or auxiliary output supplies the correct voltage and can support the listed 50mA current draw before installation.
4. How often does the strobe flash?
   The SECOR ML02 has a listed strobe frequency of approximately 80 flashes per minute. This provides a repeated visual warning or status signal that can be used for compatible security and access control applications.
5. Is the ML02 waterproof?
   Yes. The ML02 is described as waterproof. The installer should still use appropriate cable entry, mounting and sealing practices to suit the final location, especially where the strobe may be exposed to moisture or changing weather conditions.
6. How is the ML02 mounted?
   The ML02 uses two stud mounting. The mounting surface should be suitable for the strobe body, cable access and intended visibility angle. The installer should also confirm that the strobe is positioned where the blue visual indication can be seen clearly when activated.
7. Can the ML02 be used with access control systems?
   Yes. The ML02 can be used as a visual indicator in compatible access control or security installations where a 12VDC strobe output is available. Typical uses may include door, gate, alarm, warning or status indication depending on the connected controller.
8. What should I check before buying the ML02?
   Before buying the ML02, confirm the system output is 12VDC, the 50mA current draw is supported, blue is the required strobe colour and the mounting position suits a two stud waterproof LED strobe. This model is available through Security Wholesalers for compatible visual signalling applications.