Product SKU: WP06
© Security Wholesalers Australia. All rights reserved. https://www.securitywholesalers.com.au/product/secor-wp06-combo-siren-strobe-with-tamper-and-built-in-eolrs/
Product Overview
The SECOR WP06 Combo Siren & Strobe with Tamper and Built-In EOLRs is an outdoor alarm warning device designed for compatible hardwired intrusion alarm systems. It combines a loud 110dB siren, bright LED strobe, selectable siren tones, adjustable sound volume, independent siren and strobe operation, front and back tampers, and built-in end-of-line resistor options in a weatherproof UV-treated housing. This makes the WP06 suitable for residential homes, small businesses, retail shops, offices, workshops, garages and light commercial sites where both audible and visual alarm indication are required. With 9–15VDC operation, low current draw and selectable EOLR values, it is a practical choice for alarm installers needing an external siren/strobe that can suit many common alarm panel wiring requirements.
Key Capabilities
Combined Siren and Strobe
The WP06 combines audible siren output and visual LED strobe indication in one external alarm device, helping alert occupants, neighbours or responders during alarm activation.
110dB Alarm Output
The siren is rated up to 110dB at 1m, providing strong audible alarm indication for suitable residential and light commercial intrusion alarm installations.
Built-In EOLR Options
Selectable built-in EOLR values help installers match the siren/strobe to common alarm panel requirements without needing to add separate external resistors in many installations.
Front and Back Tamper Protection
Front and rear tamper switches help detect attempts to open or remove the device, supporting more secure alarm installations when wired and programmed correctly.
Selectable Siren Tone and Volume
Warble and Hi/Lo tone options, plus adjustable sound level, allow installers to use a lower level for testing and a higher level for normal alarm operation.
Weatherproof UV-Treated Housing
The high quality UV-treated weatherproof case is suited to external mounting where the siren/strobe must withstand normal outdoor exposure.
Best For
- Home Alarm Systems: Suitable for residential alarm installations needing an external siren and strobe warning device.
- Small Business Security: A practical option for shops, offices, clinics, workshops and small warehouses using compatible hardwired alarm panels.
- Alarm Upgrade Jobs: Useful when replacing an older siren cover, strobe or external sounder with a combined siren/strobe unit.
- Visible Alarm Deterrence: The external housing and bright LED strobe provide a clear alarm presence on the outside of a premises.
- Installer-Friendly Wiring: Built-in EOLR options and independent siren/strobe operation make it useful for many common alarm panel configurations.
Why Choose the WP06
Choose the SECOR WP06 when the alarm installation needs a combined external siren and strobe with tamper protection and built-in resistor flexibility. Its 110dB siren output and LED strobe help provide both audible and visual alarm indication, while independent siren and strobe operation gives installers flexibility when matching the device to panel outputs. Compared with a basic external sounder, the WP06 adds front and back tamper protection, selectable tones, adjustable sound level and selectable EOLR values for common panel setups. This model, supplied by Security Wholesalers, is a strong choice for compatible hardwired alarm installations where reliable external warning, clean wiring and installer-friendly configuration are important.
Buyer Decision Tips
Buyer Tip: Confirm the alarm panel output ratings before installation. The WP06 siren draws 150mA and the strobe draws 50mA, so the total load should be checked against the panel or auxiliary power supply capacity.
Buyer Tip: Match the built-in EOLR setting to the alarm panel zone programming. The selectable values help simplify wiring, but the chosen resistor value must suit the panel’s supervision requirements.
Key Features & Technical Specifications
| Product Type |
External combo siren and strobe. |
| Model |
WP06. |
| Brand |
SECOR. |
| Siren Output |
110dB at 1m. |
| Siren Current |
150mA. |
| Strobe Current |
50mA. |
| Operating Voltage |
9–15VDC. |
| Siren Tone Options |
Selectable Tone 1 warble or Tone 2 Hi/Lo. |
| Sound Volume |
Adjustable low dB for testing and high dB for normal operation. |
| Strobe Design |
Bright LED strobe design. |
| Operation |
Independent siren and strobe operation. |
| Tamper Protection |
Front and back tampers. |
| EOLR Support |
Built-in EOLRs, suitable for many major alarm panels. |
| EOLR Values |
Selectable 2.2kΩ, 3.3kΩ, 5.6kΩ and 6.8kΩ values. |
| Housing |
High quality UV-treated weatherproof case. |
| Dimensions |
200 x 110 x 70mm. |
| Typical Installation |
External siren/strobe for compatible hardwired intrusion alarm systems. |
Ideal Use Cases
Front Exterior Wall
Install where the siren and strobe can provide clear alarm indication from the front of the property.
Residential Alarm Upgrades
Use when upgrading an older home alarm siren or adding external visual indication to a compatible hardwired panel.
Retail and Office Premises
A practical external alarm warning device for shops, offices, clinics, salons and similar small business sites.
Workshops and Garages
Suitable for external mounting on workshops, garages or outbuildings connected to a compatible alarm system.
Alarm Panel Replacement Jobs
Useful when installing a new panel and matching external siren/strobe wiring to the updated alarm output configuration.
Visible Deterrent Installations
Use where a clearly visible external alarm device is preferred as part of the site’s security presence.
Choosing the Right Model
- Choose this model if: You need a SECOR external combo siren/strobe with front and back tampers, built-in EOLRs and 110dB siren output.
- Choose WP16 if: You need a slimmer SECOR combo siren/strobe design with similar siren/strobe functionality but a shallower enclosure.
- Check before installation: Confirm alarm panel output capacity, siren/strobe wiring, tamper wiring, EOLR value, mounting location and cable route.
FAQs
- What is the SECOR WP06 used for?
The SECOR WP06 is used as an external combo siren and strobe for compatible hardwired intrusion alarm systems. It provides both audible siren output and visual LED strobe indication, making it suitable for homes, shops, offices, workshops and light commercial alarm installations.
- How loud is the WP06 siren?
The WP06 siren is rated at 110dB at 1m. Actual perceived loudness depends on mounting position, building layout, background noise and whether the device is installed in a clear external location. The sound level can also be adjusted for testing and normal operation.
- Does the WP06 include tamper protection?
Yes. The WP06 includes front and back tampers, helping the alarm system detect opening or removal attempts when the tamper circuit is wired and programmed correctly. This is important for external devices because they may be accessible from outside the protected premises.
- Does the WP06 include built-in EOLRs?
Yes. The WP06 includes built-in selectable end-of-line resistor values, including 2.2kΩ, 3.3kΩ, 5.6kΩ and 6.8kΩ. These options help installers match the device to many common alarm panels, but the selected resistor must match the panel’s zone supervision settings.
- Can the siren and strobe operate independently?
Yes. The WP06 supports independent siren and strobe operation, allowing compatible alarm panels to control audible and visual outputs separately where the panel wiring and programming support it. This gives installers more flexibility than a simple combined-only warning device.
- Is the WP06 suitable outdoors?
Yes. The WP06 uses a high quality UV-treated weatherproof case, making it suitable for external mounting when installed correctly. The installer should still choose an appropriate location, protect cabling, maintain tamper operation and follow the alarm panel wiring requirements.
- What voltage does the WP06 require?
The WP06 operates from 9–15VDC and is commonly used with compatible 12V hardwired alarm systems. The siren current is 150mA and the strobe current is 50mA, so the total load should be checked against the alarm panel or auxiliary power supply output.
- What should I check before buying the WP06?
Before buying the WP06, confirm panel output capacity, siren and strobe wiring, tamper wiring, EOLR value requirements and mounting location. This model is available through Security Wholesalers for compatible hardwired alarm installations where an external combo siren/strobe with tamper and built-in EOLRs is required.
