Product SKU: HM-TD1218-2/G0/T1A
Product Overview
The Hikvision HM-TD1218-2/G0/T1A HeatPro is a compact bi-spectrum turret camera that combines a 160 × 120 thermal imaging module with a 5MP optical camera in a single outdoor-rated unit. Designed for environments where standard CCTV falls short, it delivers reliable detection across challenging lighting conditions, heavy shadows, smoke and poor-visibility scenarios. The camera is well suited to warehouses, construction sites, industrial yards, waste facilities, car parks and manufacturing areas where early fire detection and perimeter security are essential priorities. By fusing thermal and optical channels into one device, operators gain both heat-based event detection and full-colour visual verification without needing separate cameras. Built-in smoke detection, temperature exception alarms and fire point detection make it a practical choice for any site manager or security integrator looking to strengthen early-warning capabilities.
Key Capabilities
Bi-Spectrum Thermal & Optical Fusion
The camera combines a 160 × 120 thermal sensor with a 5MP optical module and supports bi-spectrum image fusion and picture-in-picture display. This means operators can read heat signatures and simultaneously view a clear colour image from the same device, improving situational awareness significantly.
Early Fire Point Detection
The thermal channel actively monitors scenes for fire point events, capable of detecting a 0.5 × 0.5 m fire source at up to 13.2 m. This early-warning function allows security teams to respond before a small ignition event escalates into a major incident, making it invaluable for high-risk industrial sites.
Smoke Detection
Built-in smoke detection analyses the optical image for smoke presence, triggering alarms before a fire becomes visible on a conventional camera. This function works alongside the thermal channel to create a layered early-warning system especially relevant for waste sites, timber yards and storage facilities.
Human & Vehicle Detection (VCA)
The camera delivers video content analysis capable of detecting humans at up to 20 m and vehicles at up to 60 m on the thermal channel. This makes it highly effective for after-hours perimeter monitoring, triggering alerts only for genuine human or vehicle intrusions rather than animals or environmental changes.
Temperature Exception Alarm
The thermal module can be configured to trigger an alarm when surface temperatures exceed a defined threshold. This is particularly useful for monitoring electrical equipment, machinery or stored materials that may indicate an overheating fault or smouldering risk well before flames develop.
PoE & IP67 Weather Protection
Powered over a single Ethernet cable via PoE, installation is simplified with no separate power run required. The IP67-rated housing ensures reliable operation in outdoor environments exposed to rain, dust and humidity, making it a durable long-term solution for external mounting on industrial and commercial properties.
Best For
- Industrial & Manufacturing Sites: Monitors equipment, stored materials and production areas for heat anomalies, overheating machinery and early fire events around the clock.
- Waste & Recycling Facilities: Detects spontaneous combustion and smouldering within waste stockpiles where thermal events can develop unseen beneath the surface before breaking into open flame.
- Construction Sites & Yards: Provides after-hours perimeter security with human and vehicle detection across large open areas with minimal infrastructure, especially where lighting is unreliable or absent.
- Car Parks & Outdoor Storage: Identifies intruders and temperature anomalies in large open areas where conventional cameras may struggle at night or in adverse weather conditions.
- Warehouses & Logistics Centres: Guards against fire risk in high-value goods storage areas and provides perimeter detection at entry and exit points where early threat identification is critical.
Why Choose the HM-TD1218-2/G0/T1A
Standard CCTV cameras can only capture what is visible to the naked eye — they are blind to heat, smoke in early stages, or a smouldering fire developing inside a waste pile or electrical cabinet. The Hikvision HM-TD1218-2/G0/T1A changes that by pairing a genuine thermal sensor with a high-resolution 5MP optical camera, giving security operators two independent information streams from one installation point. The result is fewer missed events, faster response times and a significant reduction in the risk of fire damage escalating unchecked. Unlike a basic bullet or dome camera, this unit actively analyses temperature data and can alert your team before any flame is visible. For integrators and end users sourcing this camera through Security Wholesalers, it represents a cost-effective way to add genuine thermal detection capability to a site without the expense of a full industrial-grade thermal system.
Buyer Decision Tips
Buyer Tip: The 1.8mm thermal lens on this model provides a wide field of view suited to monitoring open areas, yards and wide perimeter zones rather than long narrow corridors. If your site requires detection over a longer, narrower field of view, check Hikvision’s HeatPro range for models with longer focal lengths before purchasing.
Buyer Tip: Smoke detection on this camera works via the optical channel by analysing visual changes in the scene. Ensure the camera’s optical lens has a clear, unobstructed line of sight to the area of concern — do not rely on smoke detection in spaces with heavy dust, steam or condensation that may produce false positives without proper configuration.
Key Features & Technical Specifications
| Model |
HM-TD1218-2/G0/T1A |
| Camera Type |
Bi-Spectrum Thermal & Optical Turret Camera |
| Thermal Sensor Resolution |
160 × 120 |
| Thermal Lens Focal Length |
1.8mm |
| Optical Camera Resolution |
5MP |
| Optical Lens Focal Length |
2mm |
| Image Fusion |
Bi-spectrum image fusion with picture-in-picture display |
| Human VCA Detection Range (Thermal) |
Up to 20 m (human: 1.8 × 0.5 m target) |
| Vehicle VCA Detection Range (Thermal) |
Up to 60 m (vehicle: 1.4 × 4.0 m target) |
| Fire Point Detection Range |
Up to 13.2 m (object: 0.5 × 0.5 m) |
| Smoke Detection Range |
Up to 3.15 m |
| Temperature Measurement Range (0.2 × 0.2 m object) |
Up to 7 m |
| Temperature Measurement Range (0.5 × 0.5 m object) |
Up to 17.5 m |
| DORI Detection Range (Human) |
88 m |
| DORI Detection Range (Vehicle) |
268 m |
| Smart Detection |
Human detection, vehicle detection, temperature exception alarm, fire point detection, smoke detection |
| Power Supply |
PoE (Power over Ethernet) |
| Weather Protection Rating |
IP67 |
| Audio / Alarm I/O |
Yes |
| Smart Hybrid Light |
Yes |
Ideal Use Cases
Waste & Recycling Facilities
Thermal imaging detects heat build-up within waste stockpiles, alerting operators to spontaneous combustion risk well before flames become visible to a standard CCTV camera.
Industrial Manufacturing Areas
Monitors machinery, electrical switchboards and production lines for temperature anomalies, helping maintenance teams identify overheating faults and fire risks during and after operational hours.
Construction Site Perimeters
Detects human and vehicle intrusions after hours across large open perimeters where conventional cameras lack effectiveness, reducing theft, vandalism and liability in unmanned environments.
Warehouse & Logistics Facilities
Provides dual-channel monitoring of entry zones and storage areas, combining thermal fire detection with clear 5MP optical footage for post-event review and identification.
Car Parks & Open Outdoor Areas
Smart hybrid lighting and optical imaging provide usable colour footage at night, while the thermal channel ensures that persons or vehicles are not missed in low-light or shadowed zones.
High-Value Asset Storage
For sites storing machinery, vehicles or raw materials outdoors, thermal perimeter monitoring provides a reliable after-hours detection layer that is unaffected by darkness, fog or obscured sightlines.
Choosing the Right Model
- Choose this model if: Your site requires wide-area thermal perimeter detection, early fire prevention, smoke monitoring and human/vehicle VCA in a compact turret form factor that can be powered by PoE with no separate power supply.
- Choose a different model if: You need thermal detection over longer distances or a narrower field of view — in that case, consider a HeatPro model with a longer thermal focal length to suit a corridor-style or long-range monitoring application.
FAQs
- What is the difference between the thermal and optical channels on the HM-TD1218-2/G0/T1A?
The thermal channel captures heat emitted by objects and is used for fire detection, temperature monitoring and detecting people or vehicles in complete darkness or smoke. The optical channel provides a conventional colour or black-and-white image for visual identification and verification. Both channels operate simultaneously and can be displayed together using bi-spectrum fusion or picture-in-picture mode.
- Can this camera detect fire through walls or closed containers?
No. Thermal imaging detects surface heat radiation and cannot see through solid walls, sealed containers or thick insulation. It is most effective when there is a direct line of sight to the heat source. For smouldering materials in open stockpiles, it can detect heat rising from the surface before flames break out.
- What is the maximum range for detecting a person using the thermal channel?
According to the range table included in this product’s documentation, the thermal VCA channel can detect a human target (1.8 × 0.5 m) at up to 20 m. For the optical channel, DORI-based detection of a human extends to 88 m. These figures are reference values and may vary depending on environmental conditions.
- Does the HM-TD1218-2/G0/T1A require a separate power supply?
No. The camera supports PoE (Power over Ethernet), which means it draws power directly through the network cable. This simplifies installation considerably, particularly in locations where running a separate power cable would be costly or impractical.
- Is this camera suitable for use outdoors in Australian conditions?
Yes. The camera carries an IP67 weather protection rating, meaning it is fully protected against dust ingress and can withstand temporary immersion in water. It is suitable for outdoor mounting in exposed locations subject to rain, humidity and dust common across Australian industrial and commercial sites.
- Where can I find the datasheet for the HM-TD1218-2/G0/T1A?
The official datasheet for the HM-TD1218-2/G0/T1A is linked in the Additional Information section below this description. Security Wholesalers provides the datasheet directly on the product page so you can review full specifications before purchasing.
- Can the temperature exception alarm be customised to specific thresholds?
Yes. The temperature exception alarm can be configured to trigger when monitored surfaces exceed a user-defined temperature threshold. This allows the system to be tailored to the specific risk profile of the site, whether monitoring electrical equipment, stored goods or open outdoor areas susceptible to heat build-up.
- Does this camera integrate with Hikvision NVRs and VMS platforms?
Yes. As a Hikvision HeatPro camera, the HM-TD1218-2/G0/T1A is designed to integrate with Hikvision NVRs and Hikvision’s iVMS and HikCentral management platforms. Confirm compatibility with your specific NVR firmware version before finalising your installation design.
Additional Information
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty and authorised dealer partner support.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Official Hikvision Partner for 2026
Authorised Hikvision Dealer Partner for 2026
As a Trusted Hikvision Dealer Partner and Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
