Product Overview
Running mains cable to remote gates, farm sheds, or temporary construction sites is often impractical or prohibitively expensive. The DS-2XS6K01-C36S80 is an 80W solar power module from Hikvision, designed to provide self-contained off-grid power for compatible solar-powered camera installations. Featuring an 80W photovoltaic panel paired with a 360Wh rechargeable lithium battery system, it stores solar energy during daylight and supplies 9 to 12.6 VDC output at up to 30W through 2 x Ø5.5mm coaxial power plugs. Equipped with a comprehensive battery management system, it includes battery display, high-low temperature protection, charge-discharge protection, low-battery sleep protection and remote wakeup support. Built with IP66 weather resistance and rated to withstand wind speeds up to 40m/s, the module suits exposed outdoor locations. It also incorporates an RS-485 half-duplex interface, supporting communication with compatible Hikvision solar camera kits at farms, compounds, remote gates and temporary surveillance deployments.
Key Capabilities
80W Photovoltaic Charging
The integrated 80W solar panel harvests sunlight to recharge the internal battery system, making the module viable for remote farms, gates, yards and construction sites where connecting to mains power is not practical or available.
360Wh Lithium Battery Storage
Four 90Wh lithium cells provide 360Wh of total stored capacity at 10.8V, supplying connected camera equipment through periods of limited solar input such as overnight, overcast weather or seasonal low-sun conditions at remote sites.
Comprehensive Battery Management
Battery management includes a status display, high-low temperature protection, charge-discharge protection, low-battery sleep protection and remote wakeup. These features help protect the battery and support more consistent long-term operation at off-grid outdoor sites.
IP66 and Wind-Load Rated Outdoor Housing
IP66 protection guards the module against dust and rain in outdoor installations. The rated wind resistance of up to 40m/s supports deployment in exposed areas when correctly mounted to a suitable structure for the site conditions.
RS-485 and Dual Power Output Integration
An RS-485 half-duplex interface and 2 x Ø5.5mm coaxial power plugs support integration with compatible Hikvision solar camera kits, allowing the module to function as a coordinated power and communication component within a complete off-grid surveillance setup.
Best For
- Off-Grid Remote Sites: Farms, rural gates, paddock entries, remote yards and utility locations where connecting to the mains electricity grid is cost-prohibitive or physically impractical.
- Compatible Hikvision Solar Camera Kits: Designed to supply 9 to 12.6 VDC output at up to 30W to connected Hikvision solar-compatible camera equipment via the included coaxial power connectors.
- Temporary Surveillance Deployments: Construction sites, roadworks, events and short-term monitoring positions where fixed electrical installation is not justified or permitted.
- Exposed Outdoor Environments: Open-area sites requiring IP66-rated, wind-load-rated solar power hardware that can withstand outdoor dust, rain and wind exposure when properly mounted.
Why Choose the DS-2XS6K01-C36S80
The DS-2XS6K01-C36S80 goes beyond a basic solar panel by combining an 80W photovoltaic panel, a 360Wh lithium battery system and a fully integrated battery management suite in a single IP66-rated module. The battery protection features, including temperature protection across -20 degrees C to 60 degrees C discharge range, low-battery sleep protection and remote wakeup, address the practical challenges of long-term off-grid battery operation that a simpler panel-and-battery combination would leave unmanaged. The rated battery life of more than 500 cycles and the RS-485 communication interface add further value for installers building dependable remote surveillance infrastructure. With RCM approval and a wind resistance rating of up to 40m/s, it is a purpose-built component for serious off-grid security deployments rather than a general-purpose power product. The DS-2XS6K01-C36S80 is available through Security Wholesalers for installers and integrators working on remote Hikvision solar camera projects.
Buyer Decision Tips
Buyer Tip 1 – Confirm Camera Compatibility and Power Draw: The DS-2XS6K01-C36S80 provides a maximum output of 30W at 9 to 12.6 VDC through 2 x Ø5.5mm coaxial plugs. Before purchasing, confirm that your intended Hikvision solar camera or kit is compatible with this voltage and does not exceed the 30W output limit. Connecting equipment with a higher power draw than the module supports may result in unreliable operation or damage to connected devices.
Buyer Tip 2 – Assess Solar Exposure, Mounting and Site Conditions Before Installation: Solar charging performance depends heavily on panel angle, orientation, shading, dust accumulation, daily sunlight hours and seasonal variation at your specific site. The 360Wh battery provides a buffer for low-solar periods, but undersized solar exposure relative to the connected load will reduce available runtime. Additionally, while the module is rated to 40m/s wind resistance, the mounting structure and installation method must also be rated for local wind conditions. The module carries no specific anti-corrosion rating, so coastal or chemically corrosive environments require additional consideration before installation.
Key Features & Technical Specifications
| Model |
DS-2XS6K01-C36S80 |
| Product Type |
Solar power module with integrated lithium battery |
| Solar Panel Output |
80W photovoltaic panel |
| Battery Capacity |
360Wh rechargeable lithium battery (4 x 90Wh cells) |
| Battery Voltage |
10.8V |
| Battery Life |
More than 500 cycles |
| Battery Management |
Battery management and battery display supported |
| Battery Protection |
High-low temperature protection, charge-discharge protection, low-battery sleep protection |
| Remote Wakeup |
Supported |
| Power Output |
9 to 12.6 VDC, maximum 30W |
| Power Connectors |
2 x Ø5.5mm coaxial power plugs |
| Communication Interface |
1 x RS-485 half-duplex |
| Charging Temperature Range |
-20 degrees C to 45 degrees C |
| Discharging Temperature Range |
-20 degrees C to 60 degrees C |
| Weather Protection |
IP66 water and dust resistant |
| Wind Resistance |
Level 12, up to 40m/s |
| Anti-Corrosion Protection |
No specific protection listed |
| Assembled Dimensions |
640.4 x 735.9 x 760mm (maximum assembled size) |
| Weight |
Approx. 24kg (module); approx. 30kg (packaged) |
| Approvals |
CE-EMC, RCM, IC, CB, CE-RoHS, WEEE, REACH |
Ideal Use Cases
Farms and Rural Properties
The 80W solar panel and 360Wh battery provide a practical off-grid power source for compatible cameras at sheds, fuel storage areas, livestock zones, paddock gates and other farm locations where mains power is not available or not economical to extend.
Remote Gates and Access Points
Private entry gates, long driveways and rural access roads often have no nearby power supply. The DS-2XS6K01-C36S80 powers compatible surveillance cameras at these positions without requiring trenching or electrical contractor work for mains connection.
Construction Sites and Temporary Compounds
Construction environments frequently lack permanent power infrastructure and require cameras to be relocated as work progresses. The solar module supports temporary and repositionable camera power with IP66 weather resistance for exposed outdoor site conditions.
Storage Yards and Industrial Depots
Laydown areas, equipment yards and depots with large open footprints can benefit from solar-powered cameras where installing wired power to every required camera position is impractical. The 30W maximum output suits compatible low-power surveillance devices at these sites.
Temporary Event and Roadworks Monitoring
Short-term surveillance at events, road construction zones and temporary worksites benefits from the self-contained solar power approach. Low-battery sleep protection and remote wakeup help preserve battery charge during inactive monitoring periods at these deployments.
Choosing the Right Model
- Choose this model if: You need a purpose-built Hikvision off-grid solar power module with an 80W panel, 360Wh lithium battery, integrated battery management, RS-485 communication and IP66-rated outdoor housing for remote camera deployments where mains power is unavailable or impractical.
- Choose a different model if: Your connected camera or device exceeds 30W power draw, as this module’s maximum output will not safely support higher-consumption equipment. If your site has corrosive or coastal exposure, confirm whether a more suitable module with specific anti-corrosion protection is required before committing to this product.
- Choose a different model if: Your location receives very limited daily sunlight (such as heavily shaded or high-latitude winter installations), as solar charging performance depends on adequate sunlight exposure and a smaller or lower-capacity battery may not maintain sufficient runtime for your connected equipment without supplementary power.
FAQs
- What is the DS-2XS6K01-C36S80 designed to do?
The DS-2XS6K01-C36S80 is a Hikvision solar power module that provides off-grid power for compatible solar-capable camera equipment. It combines an 80W photovoltaic panel with a 360Wh lithium battery, battery management, RS-485 communication and 2 x Ø5.5mm coaxial power outputs. It is intended for remote locations where mains power is unavailable or too costly to install.
- What is the maximum power output of this module?
The module provides 9 to 12.6 VDC output at a maximum of 30W through 2 x Ø5.5mm coaxial power plugs. Equipment connected to this module must be compatible with this voltage range and must not exceed the 30W maximum output rating, otherwise the module may not support stable or safe operation.
- How much battery capacity does the DS-2XS6K01-C36S80 include?
It includes a 360Wh rechargeable lithium battery system made up of four 90Wh cells operating at 10.8V. The rated battery life is more than 500 cycles under listed conditions. This stored capacity allows connected equipment to continue operating during periods of limited solar input such as overnight or during cloudy weather.
- What battery protection features are included?
The module includes high-low temperature protection across a charging range of -20 degrees C to 45 degrees C and a discharging range of -20 degrees C to 60 degrees C, charge-discharge protection to reduce stress on the cells, low-battery sleep protection to preserve remaining charge when levels are critically low, and remote wakeup to restore operation after a sleep event without requiring manual on-site intervention.
- Is the DS-2XS6K01-C36S80 suitable for outdoor installation in Australian conditions?
Yes, the module carries IP66 weather resistance for protection against dust and rain. It also lists a wind resistance rating of Level 12, up to 40m/s. However, the module has no specific anti-corrosion rating listed in the datasheet. For coastal, marine or industrial chemical environments, additional assessment is recommended before installation. RCM approval is confirmed, which is relevant for Australian deployments. The DS-2XS6K01-C36S80 is supplied through Security Wholesalers for Australian projects.
- What communication interface does the module include?
The module includes 1 x RS-485 half-duplex interface. This supports communication between the solar power module and compatible Hikvision solar camera systems, enabling coordinated operation including remote wakeup commands and system status monitoring within a compatible off-grid deployment.
- Does this module support mains power as a backup or alternative?
Yes, the short description confirms the module supports both solar power and mains electricity, providing flexibility for installations where occasional or supplementary mains power is available. This can help maintain camera operation during extended periods of low solar charging at sites that have intermittent access to grid power.
- What should be confirmed before installing the DS-2XS6K01-C36S80?
Before installation, confirm that the connected camera or system is compatible with the 9 to 12.6 VDC output and does not exceed the 30W maximum output rating. Assess daily sunlight hours at the specific site, panel orientation and angle, any shading from structures or vegetation, mounting structure suitability for the listed wind load rating, expected battery runtime relative to the connected load, and whether the site environment requires additional corrosion or chemical resistance beyond IP66 protection.
Additional Information
