Product SKU: D4200-VE
Product Overview
Across perimeter entrances, car park barriers, warehouse loading docks, and access control gates, the AXIS D4200-VE Network Strobe Speaker delivers network-controlled audio-visual alerting from a single IP-based device. Combining a built-in speaker with a 9-colour LED strobe, it can issue live announcements, play prerecorded messages, trigger alarm sounds, and flash configurable light patterns to communicate different event types clearly. Equipped with AXIS Audio Manager support for zone scheduling and content management, plus AXIS Audio Analytics for sound-triggered detection, this device handles both reactive security deterrence and proactive operational messaging. It also integrates with cameras, radar, access control, and IoT platforms through VAPIX, MQTT, SIP, and I/O connections. PoE powers the device directly over the network cable, and a PoE out port can forward power to a connected PoE Class 4 device nearby. IP66, IK09, and NEMA 4X ratings make it suitable for exposed outdoor installations in demanding environments.
Key Capabilities
9-Colour LED Strobe with Configurable Patterns
Red, green, blue, amber, pink, turquoise, purple, yellow, and white can be mapped to specific event types. Assigning distinct colours to access granted, access denied, intruder alert, and safety warning means anyone on site can interpret the signal instantly without additional instruction.
Custom Live and Prerecorded Audio
The built-in speaker supports live announcements, prerecorded messages, and alarm sounds managed through AXIS Audio Manager. This gives installers and operators far more flexibility than a fixed-tone siren, allowing tailored messaging for security warnings, visitor guidance, emergency procedures, and routine operational instructions.
Two-Way Audio Support
When configured with a compatible microphone and system setup, the D4200-VE supports two-way audio. This enables operators to communicate directly with people at gates, loading docks, restricted entries, or service areas, supporting incident response and visitor management without deploying a separate intercom device.
PoE and PoE Out
Powered over a single Ethernet cable, the D4200-VE also forwards power to a connected PoE Class 4 device via its PoE out port. This reduces cabling runs at locations where a nearby camera, sensor, or intercom needs power, simplifying installation design at perimeter posts and entry points.
Broad Network Integration
VAPIX, MQTT, SIP, and I/O support allows the D4200-VE to be triggered by Axis cameras, radar, video analytics, access control events, third-party sensors, and IoT workflows. Each integration type can activate different audio and strobe profiles, making one device capable of handling multiple alert scenarios across a site.
IP66, IK09, and NEMA 4X Protection
The rated casing handles dust ingress, sustained water exposure, impact resistance, and corrosion-prone environments. These ratings make the D4200-VE appropriate for fully exposed perimeter installations, industrial yards, car park columns, warehouse exteriors, and coastal or chemical environments where standard indoor enclosures would degrade quickly.
Best For
- Perimeter Deterrence: Triggering prerecorded warnings, alarm sounds, and strobe alerts automatically when a camera, radar, or analytics rule detects unauthorised activity near a restricted boundary.
- Access Control Signalling: Using colour-coded strobe output and custom audio to communicate access granted, denied, or emergency status at gates, boom gates, and secured entry points.
- Industrial and Warehouse Safety Messaging: Delivering operational alerts, vehicle movement warnings, loading dock instructions, and emergency announcements in high-noise environments where visual reinforcement is needed alongside audio.
- Multi-Zone Audio Management: Integrating with AXIS Audio Manager to schedule content, manage zones, and distribute announcements across schools, commercial buildings, or multi-area sites from a centralised platform.
- Car Park and Traffic Flow Control: Guiding vehicle and pedestrian movement using colour-coded strobe patterns and automated audio instructions triggered by access control or sensor events.
Why Choose the AXIS D4200-VE
Where a traditional fixed-tone siren or single-colour strobe provides one signal for all events, the AXIS D4200-VE provides a fully configurable audio-visual response platform. The 9 LED colours, configurable light patterns, live announcements, prerecorded messages, alarm sounds, and two-way audio capability can each be mapped to specific trigger conditions, meaning security warnings, access decisions, safety alerts, and operational instructions all carry distinct, recognisable signals. AXIS Audio Analytics adds the ability to detect sudden sound changes and trigger workflows based on what is heard rather than what is seen. PoE out further reduces installation complexity at perimeter posts by eliminating the need for a separate power run to a nearby device. With a 5-year warranty and IP66, IK09, and NEMA 4X ratings for demanding outdoor locations, the D4200-VE is available through Security Wholesalers for commercial, industrial, education, and infrastructure applications.
Key Features & Technical Specifications
| Model |
AXIS D4200-VE Network Strobe Speaker |
| Part Number |
02930-001 |
| Product Type |
Network Strobe Speaker / Audio-Visual Signalling Device |
| LED Colours |
Red, green, blue, amber, pink, turquoise, purple, yellow, and white (9 colours) |
| Light Patterns |
Configurable strobe light patterns supported |
| Audio Output |
Built-in speaker supporting live announcements, prerecorded messages, and alarm sounds |
| Two-Way Audio |
Supported when used with a compatible microphone and system configuration |
| Audio Management |
AXIS Audio Manager – zone management, scheduling, and content distribution |
| Included Analytics |
AXIS Audio Analytics |
| Supported Audio Applications |
AXIS Player for Soundtrack and AXIS Speaker Functionality for Singlewire InformaCast |
| Integration |
VAPIX, MQTT, SIP, and I/O |
| Power Input |
Power over Ethernet (PoE) |
| PoE Out |
Forwards power to connected PoE Class 4 devices |
| Health Monitoring |
Built-in health monitoring with scheduled health checks |
| IP Rating |
IP66 |
| Vandal Rating |
IK09 |
| Environmental Rating |
NEMA 4X |
| Software Platform |
AXIS OS |
| Recommended Accessories |
AXIS TD4802-E Weathershield, AXIS TD4301-E Angle Mount, AXIS T91B47 Pole Mount |
| Warranty |
5-year warranty |
Ideal Use Cases
Perimeter Intrusion Deterrence
When a camera, radar, or analytics rule detects unauthorised movement near a restricted boundary, the D4200-VE can immediately trigger a prerecorded warning, alarm sound, and red or amber strobe pattern automatically via VAPIX, MQTT, or I/O without operator intervention.
Access Control Entry Points
At gates, boom gates, and secured doors, the 9-colour LED strobe can be configured to flash green for access granted and red for access denied, paired with a corresponding audio message, giving a clear dual-channel signal to drivers and pedestrians without the need for a separate display unit.
Warehouses and Industrial Yards
In high-noise working environments, combining strobe and audio output ensures safety alerts, vehicle movement warnings, and loading dock instructions are noticed. IP66 and NEMA 4X ratings handle dust, water, and corrosion exposure common in industrial settings, and the PoE out port simplifies powering a nearby sensor or camera at the same post.
Schools and Commercial Buildings
AXIS Audio Manager support allows scheduled announcements, zone-based content, and emergency lockdown messages to be managed centrally. Different strobe colours and audio profiles can be assigned to routine bells, visitor guidance, and emergency evacuation signals, giving staff and students distinct, unambiguous cues for each scenario.
Car Parks and Traffic Flow
Automated triggers from access control or sensor events can activate colour-coded strobe and custom audio instructions to guide vehicles and pedestrians through entry, exit, and queuing zones. AXIS Audio Analytics can also detect unexpected sound events in the car park and initiate alert workflows without camera coverage of every area.
Choosing the Right Model
- Choose this model if: Your site requires network-controlled audio and visual alerts from a single outdoor-rated device, with the flexibility to assign different colours, light patterns, and audio messages to different event types and integration sources.
- Choose a different model if: You only need audio output without visual strobe signalling, in which case a dedicated network speaker without strobe capability may be a more cost-effective choice. If two-way audio at an entry point is the primary requirement, a network video door station or intercom device with a built-in camera and microphone may better suit the application.
- Consider accessories if: The installation is in an exposed outdoor location with direct rain or sun exposure. The optional AXIS TD4802-E Weathershield provides additional protection, and the AXIS T91B47 Pole Mount supports freestanding perimeter installations where wall mounting is not practical.
FAQs
- What does the AXIS D4200-VE do that a standard network speaker cannot?
A standard network speaker delivers audio only. The D4200-VE adds a 9-colour LED strobe with configurable light patterns, allowing each alert type to carry both an audible message and a distinct visual signal. This dual-channel output means people on site receive the same notification through 2 separate sensory channels, which is particularly useful in noisy industrial environments or for hearing-impaired users.
- Does the AXIS D4200-VE have a built-in microphone for two-way audio?
The D4200-VE supports two-way audio functionality, but this requires a compatible external microphone and appropriate system configuration. The device itself includes a built-in speaker for output. If two-way communication is a core requirement of your installation, confirm that your system design includes the appropriate microphone hardware and network audio configuration before purchasing.
- How is the D4200-VE triggered in a security event?
The device supports triggering via VAPIX API commands, MQTT messages, SIP calls, and physical I/O connections. This means it can be activated by Axis cameras, radar units, video analytics rules, access control events, third-party sensors, or IoT platform workflows. Different triggers can activate different audio and strobe profiles, so one device can respond differently to an intrusion alert versus an access control decision.
- What does PoE out mean for installation planning?
The D4200-VE receives its own power via PoE and can forward that power to a connected PoE Class 4 device through its PoE out port. In practical terms, this means you can run a single Ethernet cable to the D4200-VE mounting location and then connect a nearby camera, sensor, or other compatible device to it, rather than running a second cable from the switch. Check the full power budget of your PoE switch port before relying on this feature.
- Is the D4200-VE suitable for fully exposed outdoor mounting on a perimeter post or fence line?
Yes. IP66 dust and water resistance, IK09 impact resistance, and NEMA 4X protection for corrosion-prone and washdown environments make it appropriate for exposed outdoor use. For installations with direct rain or sun exposure, the AXIS TD4802-E Weathershield is a recommended accessory. The AXIS T91B47 Pole Mount supports freestanding post installations where wall or ceiling mounting is not available.
- What is AXIS Audio Analytics and what does it detect?
AXIS Audio Analytics is included with the D4200-VE and can detect sudden increases in sound level and other relevant audio events. This allows the device or a connected system to trigger alerts or automated responses based on what is heard in the area, adding audio-based situational awareness to locations where a camera may not have a clear line of sight to an incident.
- Where can I find the datasheet and purchase the AXIS D4200-VE?
The official datasheet is linked in the Additional Information section below. The AXIS D4200-VE is available through Security Wholesalers for installers and integrators working on commercial, industrial, education, and public-space audio-visual signalling projects. Contact the team for volume pricing, integration support, or compatible accessory recommendations.
Additional Information
