Product SKU: TU1002-VE
Product Overview
In locations where video surveillance is restricted or prohibited, the AXIS TU1002-VE Microphone Kit provides a purpose-built solution for capturing clear outdoor audio across a wide area. Enclosed in a rugged IP66-rated and IK10-rated housing, this outdoor microphone is designed to withstand exposure to rain, dust and physical impact, making it suited to building perimeters, secure facility entrances, correctional environments and other areas where audio monitoring must operate independently of cameras. Featuring a hemispherical microphone element with a frequency response spanning 20 Hz to 20 kHz and a signal-to-noise ratio of 74 dB, the TU1002-VE captures both speech and ambient environmental sound with consistent clarity. It connects via a standard 3.5 mm stereo plug, integrating directly with compatible Axis devices including the AXIS C8110 Network Audio Bridge to support audio recording, event detection and audio analytics on an existing network infrastructure.
Key Capabilities
IP66 and IK10 Outdoor Housing
The TU1002-VE is rated IP66 for complete dust and water ingress protection and IK10 for resistance to physical impact, allowing reliable long-term deployment at exposed outdoor locations such as building entrances, perimeter walls and secure facility gates.
Hemispherical Audio Capture
The embedded microphone element captures sound hemispherically, picking up audio from all directions without requiring precise directional alignment during installation. This supports broad area coverage from a single unit across open outdoor spaces or corridor-style environments.
Wind Noise Reduction
A metallic mesh windscreen combined with weatherproof internal membranes reduces wind interference that commonly degrades outdoor microphone recordings. This helps maintain audio intelligibility in exposed installations where wind noise would otherwise obscure speech or events.
Full-Range Frequency Response
With a frequency response of 20 Hz to 20 kHz and a signal-to-noise ratio of 74 dB, the TU1002-VE accurately reproduces the full audible spectrum. This supports both clear speech capture and detection of low-frequency environmental sounds relevant to security events.
Network Audio Integration via 3.5 mm Input
The standard 3.5 mm stereo plug connects to compatible Axis devices including audio bridges and recorders with external microphone inputs. This enables the TU1002-VE to feed into network audio systems for centralised recording, event-triggered alerts and audio analytics without additional signal conversion hardware.
Best For
- Camera-Restricted Zones: The enclosed microphone form factor captures audio in areas where video surveillance is not permitted by policy or regulation, providing a compliant monitoring option at facilities such as correctional centres, interview rooms and welfare areas.
- Exposed Outdoor Perimeters: The IP66 and IK10 enclosure with wind noise reduction components supports permanent installation at building exteriors, gate access points and loading dock entries where weather and tampering risk are ongoing concerns.
- Axis Network Audio Deployments: When paired with compatible Axis audio bridge devices such as the AXIS C8110, the TU1002-VE feeds into a networked audio infrastructure supporting remote monitoring, scheduled recording and audio-triggered event detection.
- Supplementary Audio Coverage: For surveillance systems where existing cameras do not include microphones, the TU1002-VE adds dedicated audio capture to zones already covered by video, improving situational awareness without modifying camera infrastructure.
Why Choose the AXIS TU1002-VE
The TU1002-VE is not a generic add-on microphone. It is purpose-engineered for outdoor surveillance environments where audio quality, durability and compliance all matter. The combination of an IP66-rated enclosure, IK10 impact resistance and an internal metallic mesh windscreen addresses the specific challenges of permanent outdoor audio deployment in a way that indoor or consumer-grade microphones cannot. The 74 dB SNR and full 20 Hz to 20 kHz frequency response ensure that recordings are intelligible in post-event review and suitable for audio analytics when connected to a compatible Axis audio bridge. A maximum SPL of 112 dB means the unit handles sudden loud events without distorting, which is relevant in industrial, transport and secure facility settings. Available at Security Wholesalers, the TU1002-VE suits installers and security integrators who need a verified outdoor audio solution that connects cleanly into an existing Axis network infrastructure.
Buyer Decision Tips
Buyer Tip 1 – Confirm Host Device Compatibility: The TU1002-VE connects via a 3.5 mm stereo plug and requires a host device with a compatible external microphone input that supplies between 2 and 10 VDC. The microphone does not connect directly to a network and has no onboard network interface. Confirm that your Axis audio bridge, recorder or camera includes a suitable audio input before purchasing. The AXIS C8110 Network Audio Bridge is a confirmed compatible device referenced in the product specification.
Buyer Tip 2 – Understand Legal Requirements for Audio Recording: Audio surveillance legislation varies by state and territory in Australia. Recording audio in a workplace, public space or residential environment may require signage, consent or compliance with specific legislation. Confirm the legal requirements for your installation location before deploying any audio capture device, including the TU1002-VE.
Key Features & Technical Specifications
| Model |
TU1002-VE |
| Part Number |
02082-001 |
| Product Type |
Outdoor microphone kit |
| Microphone Type |
Hemispherical (omnidirectional capture) |
| Frequency Response |
20 Hz to 20 kHz |
| Maximum SPL |
112 dB |
| Signal-to-Noise Ratio |
74 dB |
| Sensitivity |
-26 dB, ±3 dB |
| Connector |
3.5 mm stereo plug |
| Power Requirement |
2-10 VDC (supplied by host device) |
| Power Consumption |
Approx. 0.006 W |
| Windscreen |
Metallic mesh with weatherproof membranes |
| Weather Rating |
IP66 |
| Impact Rating |
IK10 |
| Operating Temperature |
-20°C to 60°C |
| Dimensions |
Approx. 47 x 108 x 228 mm |
Ideal Use Cases
Correctional and Secure Facilities
In correctional environments, interview rooms and welfare areas where camera use may be restricted, the TU1002-VE provides audio-only monitoring coverage. Its IK10-rated enclosure resists tampering in high-risk environments where public access cannot be controlled.
Outdoor Building Entrances
The IP66 housing and metallic mesh windscreen make the TU1002-VE suited to permanent installation at outdoor entry points, gates and reception areas. Audio captured at entrances can be used alongside access control events for a more complete record of activity.
Industrial Perimeters and Yards
With an operating range of -20°C to 60°C and a maximum SPL of 112 dB, the TU1002-VE handles the temperature extremes and high ambient noise levels found at industrial yards, construction sites and loading areas without distortion or degraded output.
Network Audio Analytics Systems
When connected to a compatible Axis audio bridge such as the AXIS C8110, the TU1002-VE feeds high-quality audio into a network infrastructure capable of audio event detection, scheduled recording and integration with video management platforms.
Privacy-Sensitive Commercial Spaces
In commercial areas such as change rooms, medical waiting areas or staff-only zones where video cannot be used, the TU1002-VE provides an audio-only monitoring option that supports incident response and staff safety without breaching video privacy requirements.
Choosing the Right Model
- Choose this model if: You need a permanently installed, vandal-resistant outdoor microphone that connects to a compatible Axis audio device via 3.5 mm input, particularly in locations where IP66 and IK10 protection is required and wind noise reduction is a priority.
- Choose a different model if: You need a self-contained network audio device with its own network interface. The TU1002-VE is a passive accessory that requires a host device with a compatible 3.5 mm microphone input to function. If your system requires a standalone network microphone without a secondary host device, a purpose-built network audio unit would be more appropriate.
- Choose a different model if: Your installation is strictly indoors with no requirement for IP or IK-rated protection. Indoor environments with controlled conditions and no vandalism risk may not warrant the TU1002-VE form factor, and a standard microphone accessory with an equivalent 3.5 mm connection may suit at lower cost.
FAQs
- Does the TU1002-VE connect directly to a network?
No. The TU1002-VE is a passive microphone accessory. It connects via a 3.5 mm stereo plug to a host device with a compatible external microphone input, such as an Axis audio bridge or a camera or recorder with a 3.5 mm audio-in port. The host device handles network connectivity and recording.
- What is the confirmed compatible Axis device for this microphone?
The AXIS C8110 Network Audio Bridge is referenced in the product specification as a compatible host device. The C8110 accepts external microphone input and provides network audio capabilities including remote monitoring and audio analytics. Compatibility with other Axis devices depends on whether they include a 3.5 mm microphone input that supplies 2-10 VDC.
- How does the TU1002-VE handle wind noise in outdoor installations?
The unit includes a metallic mesh windscreen and internal weatherproof membranes that physically reduce wind-induced interference at the microphone element. This is a hardware-based solution built into the enclosure design, not a digital filter applied after capture, which helps maintain audio clarity at locations exposed to consistent outdoor airflow.
- What is the maximum SPL the TU1002-VE can handle before audio distortion?
The TU1002-VE supports a maximum sound pressure level of 112 dB. This makes it suitable for installations near loud machinery, vehicle movements or other high-intensity sound sources without the audio signal clipping or distorting during recording.
- Is the TU1002-VE suitable for use in Australia where audio recording laws vary by state?
The TU1002-VE is a hardware product and does not enforce or manage legal compliance. Audio surveillance legislation in Australia differs by state and territory, and recording conversations without consent may be regulated or restricted depending on your location and context. It is the responsibility of the installer and end user to confirm applicable legal requirements before deploying any audio capture device. The TU1002-VE is available through Security Wholesalers and is intended for use in lawfully permitted applications only.
- Can the TU1002-VE be mounted on both walls and ceilings?
Yes. The unit is designed to support both wall and ceiling mounting, giving installers flexibility in positioning the microphone at the optimal location within a surveillance zone. Because the microphone captures audio hemispherically, precise directional alignment is not required, which simplifies positioning decisions during installation.
Additional Information
