✔ Dedicated 5★ Customer Care Team ✔ Fast & Responsive Tech Support
AXIS TU8002-E 90W PoE Midspan | Outdoor-Ready | Power over Ethernet Injector
The AXIS TU8002-E delivers 90 W of Power over Ethernet to compatible network devices such as cameras and access points via a single Ethernet cable. Designed for outdoor installations where PoE switches are not available, it provides stable power and data connectivity in a weather-resistant housing. This makes it well suited to remote or exposed mounting locations where simplified cable runs and reliable power delivery are essential.
Key Features
90 W PoE Output: Supplies up to 90 W of power to compatible devices over a single Ethernet cable.
Outdoor-Ready Housing: Weather-resistant construction suits exposed or remote installation environments.
Single-Cable Deployment: Combines power and data over one cable for simplified installation and reduced cabling.
Broad Device Compatibility: Works with network cameras, access points, and other PoE-compatible devices.
Stable Power Delivery: Provides consistent, reliable PoE power where a PoE switch is not available or practical.
For installations where a PoE switch is not available or practical at the device end, the AXIS TU8002-E 90W PoE Midspan provides a straightforward way to inject both power and data over a single Ethernet cable. Delivering up to 90 watts of PoE output, it supports high-draw network devices including PTZ cameras, radar fusion units, network speakers and multi-sensor solutions that exceed the limits of standard PoE switches. Built with outdoor suitability in mind, the TU8002-E is weather-resistant and designed for deployment in exposed locations where bringing a powered switch close to the device is not feasible. Featuring Cat5e or higher compatibility, it works within existing Ethernet infrastructure without requiring specialist cabling. It is well suited to security integrators and AV system designers who need reliable high-power delivery at remote or perimeter installation points without running separate mains power feeds to each device location.
Key Capabilities
90W High-Power PoE Output
Supplies up to 90 watts over a single Ethernet cable, enabling devices that exceed standard PoE budgets – such as PTZ cameras, radar units and network audio systems – to operate without a dedicated local power feed.
Outdoor-Ready Weather Resistance
Designed for deployment in outdoor environments, the TU8002-E handles exposed installation points where a standard indoor PoE switch or injector would not be suitable, reducing the need to run long cable returns to indoor equipment rooms.
Single Cable Power and Data
Combines network data and power delivery over Cat5e or higher Ethernet cabling, removing the need for a separate mains power outlet at the device location and simplifying both conduit planning and installation labour.
Midspan Placement Flexibility
As a midspan injector, the TU8002-E can be positioned between an existing non-PoE network switch and the endpoint device, integrating into existing network infrastructure without requiring a full switch replacement.
Best For
Outdoor High-Power Devices: Supplies up to 90W directly at perimeter locations, supporting PTZ cameras, radar units and multi-sensor cameras that draw more power than a standard 30W or 60W PoE port can deliver.
Sites Without Nearby PoE Switching: Where the nearest PoE-capable switch is housed in a central equipment room and cable runs extend to outdoor device clusters, the TU8002-E allows power injection at or near the device without a separate mains connection.
Existing Non-PoE Infrastructure: Works as a midspan between a legacy non-PoE switch and a new high-power device, allowing PoE capability to be added without replacing existing switching infrastructure.
Why Choose the AXIS TU8002-E 90W PoE Midspan
The TU8002-E addresses a specific installation challenge: powering high-draw network devices in outdoor locations where neither a PoE switch nor a mains power outlet is available close to the device. A standard 15W or 30W PoE injector cannot support PTZ cameras, radar-camera fusion units or network speakers at full operating load, and an indoor-only injector cannot be mounted in exposed outdoor positions. The TU8002-E closes both gaps with its 90W output capacity and weather-resistant construction, making it a practical choice for security integrators designing perimeter systems, wide-area monitoring networks or large-site audio installations. It works over Cat5e or higher cabling already present in most commercial installations, avoiding the cost of specialist wiring. Available through Security Wholesalers, the TU8002-E is part of the AXIS accessory range and is designed to complement AXIS cameras and network devices operating in demanding environments.
Buyer Decision Tips
Buyer Tip 1 – Confirm Your Device’s PoE Power Draw: Before deploying the TU8002-E, check the maximum PoE power consumption of the target device. While the midspan supplies up to 90W, not all devices will draw that full amount. Confirm the device’s IEEE 802.3 PoE class and input power rating to ensure compatibility and avoid under-specifying or over-specifying the injector for your application.
Buyer Tip 2 – Plan for Ethernet Cable Run Length: PoE injectors, including the TU8002-E, are subject to the same 100-metre Ethernet distance limit as standard network cabling. If your device is located more than 100 metres from the midspan placement point, a network switch or repeater will be needed within that run. Plan your cable routing before ordering to avoid on-site rework.
PTZ cameras mounted at perimeter fencelines, car parks or building corners often draw more power than a standard PoE port provides. The TU8002-E’s 90W output supports full PTZ operation including zoom motors, IR illuminators and heaters in a single cable run.
Radar and Multi-Sensor Deployments
Radar-camera fusion units and multi-sensor panoramic cameras installed on poles or building facades at remote site locations require both high power and outdoor-rated injection. The weather-resistant TU8002-E is built for exactly these demanding installations.
Network Audio and Intercom Systems
Outdoor PoE speakers, horn speakers and intercom stations in car parks, loading docks or building entrances may require elevated power levels. The TU8002-E delivers up to 90W to audio endpoints where running a separate mains feed is impractical.
Legacy Network Upgrades
Sites with existing non-PoE switching infrastructure can add high-power PoE capability at specific device locations using the TU8002-E as a midspan, avoiding a full switch replacement while still supporting new high-draw AXIS devices.
Choosing the Right Model
Choose this model if: Your target device draws more power than a standard 30W PoE port can supply, or if you need to install a high-power PoE device in an outdoor location without a nearby PoE switch or mains power outlet.
Choose a different model if: You need to power multiple devices from a single unit. A PoE switch with sufficient per-port budgets and enough ports may be a more efficient solution than deploying individual injectors for each device, particularly for new-build or structured-cabling installations.
Choose a different model if: Your device’s PoE power draw is within the 15-30W range of standard PoE. A lower-rated PoE injector may be more appropriate and cost-effective for devices that do not need the TU8002-E’s 90W capacity.
FAQs
What is a PoE midspan and how does it differ from an endspan? A midspan is an inline device placed between an existing network switch and the endpoint device. It adds PoE power to the Ethernet cable without replacing the switch. An endspan is a PoE-capable switch that injects power directly from its own ports. The TU8002-E suits sites where an existing non-PoE switch is already in place and a full switch replacement is not warranted.
What types of devices can the TU8002-E power? It is suited to any PoE-compatible network device that requires up to 90W of input power over Ethernet, including high-draw PTZ cameras, radar-camera fusion units, multi-sensor cameras, network speakers and access points. Always verify your specific device’s maximum PoE power requirement before deployment.
Is the TU8002-E suitable for outdoor installation? Yes. The TU8002-E is described as weather-resistant and designed for outdoor use, making it suitable for deployment in exposed locations such as building exteriors, pole mounts and perimeter installations where an indoor-only injector would not withstand environmental conditions.
What cabling does the TU8002-E require? It requires Cat5e or higher Ethernet cabling, which is the standard for PoE installations. Standard Ethernet distance limits of 100 metres apply between the midspan and the connected device. Ensure cable runs are within this limit to maintain reliable power delivery and network performance.
Can the TU8002-E work with non-AXIS devices? The TU8002-E is compatible with IEEE 802.3 PoE-capable devices. While it is part of the AXIS product range, it can in principle supply power to any device that draws power within the IEEE 802.3 PoE framework and up to 90W. Confirm the PoE class and power requirements of any non-AXIS device before use.
Where can I obtain the datasheet for the TU8002-E? The official AXIS TU8002-E datasheet is available through Security Wholesalers via the Additional Information link on this product page, providing confirmed specifications for integration and compliance planning. Contacting the Security Wholesalers team directly is also an option for technical pre-sales queries.
All AXIS Communications IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
At SecurityWholesalers.com.au, we prioritise fast and reliable delivery across Australia. Whether you’re ordering for home or business, you can expect professional service, tracked shipments, and speedy fulfilment — every time.
✔ FREE Shipping Australia-Wide on Orders Over $100
Enjoy free express shipping on all orders over $100. For orders under $100, a flat rate of $20.00 applies. We proudly offer nationwide delivery using trusted courier partners for your peace of mind.
✔ Same-Day Despatch for Fast Delivery
Place your order before 10am (Sydney time) on any business day and we’ll do our best to despatch it the same day, subject to stock availability. We receive new stock into our warehouse every second day, so we always strive to ship the freshest arrivals directly to you. Most orders are received within 1-3 business days via the Express Post network, covering Australian capital cities and major metro areas. Deliveries to regional locations typically take 2–5 business days.
For urgent orders, please contact our customer care team to expedite the delivery and ensure that we can get your equipment to your project site on time.
✔ Reliable Couriers You Can Trust
We primarily use StarTrack Express for fast, secure shipping. Depending on warehouse availability, we may also use Toll or Couriers Please — whichever gets your order to you fastest.
✔ Order Processing & Tracking
Orders are processed Monday to Friday (excluding public holidays) and shipped within 24 hours. Tracking numbers are emailed to you by 11pm on the day your order ships. You can monitor your delivery through:
✔ Missed a Delivery?
If you’re not home at the time of delivery, your parcel will be left in a secure location if considered safe. If not, a collection card will be left and the parcel will be held at the nearest depot or post office for pickup.
✔ Need Help?
If you haven’t received your order within 4 business days, please contact us with your full name and order number. We’ll follow up promptly. Also, be sure to check your email spam folder for shipping notifications or attempted delivery messages.
Trade Discounts Available
Want even more savings? Register instantly for a Trade Account and, once approved, you’ll gain access to exclusive discounts on a wide range of products. It’s our way of supporting installers, resellers, and industry professionals with better pricing and priority service.
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back
Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
