Product SKU: 01169-001
Product Overview
The 01169-001 AXIS DIN CP-D 24/4.2 100 W Power Supply is a DIN-rail mountable 24 V DC power solution designed to provide stable, regulated power for compatible Axis equipment in cabinet-based installations. Delivering up to 4.2 A (100 W), it’s well suited to powering network cameras, media converters and related devices where dependable 24 V DC is required. With a wide operating temperature range, it’s built for demanding environments and is commonly used inside AXIS T98A-VE Cabinet Series for a neat, serviceable, professional finish.
Why Choose the 01169-001
The 01169-001 is a strong choice when you need consistent 24 V DC power in a tidy, standards-based industrial form factor. Its DIN-rail design simplifies integration into cabinets and control panels, helping installers keep wiring organised and maintenance-friendly. The regulated output supports reliable device operation, while the wide input range makes it practical across different mains conditions. For harsh sites, the broad operating temperature range adds confidence that the power supply will keep performing when cabinets are exposed to heat, cold, or variable conditions.
Key Capabilities
Stable 24 V DC Output for Critical Devices
Provides regulated 24 V DC power up to 4.2 A (100 W), helping connected equipment run consistently without the dips or fluctuations that can contribute to dropouts or unexpected resets. This is especially useful for cabinet-based deployments where multiple devices depend on reliable DC power.
DIN-Rail Cabinet Integration
Mounts directly to a standard DIN rail, making it easy to integrate into structured enclosures and surveillance cabinets. This approach improves cable management, speeds up installation, and supports cleaner servicing over time compared with loose or ad-hoc power solutions.
Wide Input Compatibility
Supports a wide AC input range, allowing straightforward deployment across varied site power conditions. This flexibility reduces the need for specialised variants and helps standardise your cabinet builds, especially when rolling out similar configurations across multiple locations.
Harsh-Environment Readiness
Designed to operate across a wide temperature range, supporting cabinet installations where internal temperatures can fluctuate significantly. This makes it a dependable option for outdoor-rated cabinets and industrial settings where environmental stability can’t always be guaranteed.
Key Features
-
100 W Regulated DC Power: Delivers up to 100 W total output, supporting multiple low-voltage devices or a single higher-draw device where stable 24 V DC is required. Regulated power helps reduce nuisance faults and improves overall system uptime in cabinet-based installations.
-
24 V DC, 4.2 A Output Capacity: Provides 24 V DC output with up to 4.2 A available current, giving you practical headroom for compatible equipment. This is ideal where device power requirements can vary due to IR illumination, heaters, or peak processing loads.
-
Adjustable Output Range: Output voltage is adjustable within a defined range, allowing installers to fine-tune delivery for cable runs and site conditions. This can help compensate for voltage drop and ensure devices receive adequate power at the point of load.
-
Wide AC Input Support: Accepts a broad AC input range, helping the unit remain practical across different mains environments and site conditions. This reduces complexity when standardising cabinet builds across multiple locations or regions.
-
DIN-Rail Mounting (IEC 60715): Designed for mounting on standard DIN rail profiles, supporting a clean, professional cabinet finish. DIN mounting improves serviceability by keeping components fixed, aligned, and accessible for technicians during maintenance or upgrades.
-
Wide Operating Temperature Range: Built to operate across very low to high temperatures, supporting challenging installations where cabinet temperatures can swing due to sun exposure, cold nights, or industrial heat sources. This helps maintain power stability when conditions are less predictable.
Specifications Summary
- Input (Rated): 100–240 V AC, 1.8 A
- Input Range: 90–264 V AC / 120–375 V DC
- Output Voltage: 24 V DC (adjustable 24–28 V DC)
- Output Current: Up to 4.2 A
- Output Power: 100 W
- Operating Temperature: -40 °C to +70 °C
- Storage Temperature: -40 °C to +85 °C
- Humidity: Max 95% RH
- Mounting: DIN rail TH35-15 / TH35-7.5 (IEC 60715)
- Dimensions: 89.9 × 91 × 57.5 mm
- Weight: 0.386 kg
- Approvals: CE, cULus, cURus, CCC, RCM, EAC
Ideal Use Cases
- AXIS Cabinet Installations – A neat, DIN-rail power solution for structured builds inside compatible surveillance cabinets.
- Industrial or Harsh Sites – Suitable where temperature swings and cabinet-based infrastructure demand consistent, regulated DC power.
- 24 V DC Device Powering – Ideal for powering compatible cameras, media converters, and related equipment that requires dependable 24 V DC.
FAQs
- What is the 01169-001 used for?
The 01169-001 is a DIN-rail mountable power supply that converts mains power to regulated 24 V DC for compatible equipment. It’s commonly used in cabinet-based installations to power devices such as network cameras or media converters that require a stable 24 V DC source. Using a dedicated DIN power supply helps keep installations tidy, improves reliability, and makes ongoing servicing easier because the power infrastructure is centralised and professionally mounted.
- Can I mount this power supply inside a surveillance cabinet?
Yes. This unit is designed for DIN-rail mounting, which is a common standard inside electrical and surveillance cabinets. DIN mounting keeps the power supply secure and aligned with other cabinet components, making cable routing cleaner and reducing the chance of accidental disconnection. It also helps technicians quickly identify and service the component later, which is valuable for commercial sites where downtime and troubleshooting time need to be minimised.
- Why does adjustable output voltage matter?
Adjustable output voltage can be helpful when you need to compensate for voltage drop across longer cable runs or when your connected device benefits from fine-tuning within the supported range. In practical terms, it gives installers flexibility to ensure the device receives adequate voltage under load, especially in cabinet builds where power distribution may feed multiple endpoints. It’s also useful for optimising stability in environments where load conditions can change.
AXIS Warranty
3-Year Manufacturer Warranty
All AXIS Communications IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit
Terms and Conditions
Free Express Shipping*
Shipping & Delivery
At SecurityWholesalers.com.au, we prioritise fast and reliable delivery across Australia. Whether you’re ordering for home or business, you can expect professional service, tracked shipments, and speedy fulfilment — every time.
✔ FREE Shipping Australia-Wide on Orders Over $100
Enjoy free express shipping on all orders over $100. For orders under $100, a flat rate of $20.00 applies. We proudly offer nationwide delivery using trusted courier partners for your peace of mind.
✔ Same-Day Despatch for Fast Delivery
Place your order before 10am (Sydney time) on any business day and we’ll do our best to despatch it the same day, subject to stock availability. We receive new stock into our warehouse every second day, so we always strive to ship the freshest arrivals directly to you. Most orders are received within 1-3 business days via the Express Post network, covering Australian capital cities and major metro areas. Deliveries to regional locations typically take 2–5 business days.
For urgent orders, please contact our customer care team to expedite the delivery and ensure that we can get your equipment to your project site on time.
✔ Reliable Couriers You Can Trust
We primarily use StarTrack Express for fast, secure shipping. Depending on warehouse availability, we may also use Toll or Couriers Please — whichever gets your order to you fastest.
✔ Order Processing & Tracking
Orders are processed Monday to Friday (excluding public holidays) and shipped within 24 hours. Tracking numbers are emailed to you by 11pm on the day your order ships. You can monitor your delivery through:
✔ Missed a Delivery?
If you’re not home at the time of delivery, your parcel will be left in a secure location if considered safe. If not, a collection card will be left and the parcel will be held at the nearest depot or post office for pickup.
✔ Need Help?
If you haven’t received your order within 4 business days, please contact us with your full name and order number. We’ll follow up promptly. Also, be sure to check your email spam folder for shipping notifications or attempted delivery messages.
Trade Discounts Available
Want even more savings? Register instantly for a Trade Account and, once approved, you’ll gain access to exclusive discounts on a wide range of products. It’s our way of supporting installers, resellers, and industry professionals with better pricing and priority service.
