The Hikvision DS-KIS606-P is a complete IP intercom bundle ideal for residential homes, small offices, or single-entry properties. It combines a 2 MP outdoor door station with a 4.3″ indoor monitor, offering high-definition video, crystal-clear audio, and mobile app access through Hik-Connect.
The door station captures a wide 131° field of view with 120 dB WDR, ensuring clear images even under bright backlight or shadows. Built-in IR illumination provides night-time visibility up to approximately 3 metres. The rugged IP65 housing is fully weather-sealed for reliable outdoor performance.
The indoor monitor offers intuitive control via a capacitive 4.3″ touch screen, supporting live view, visitor intercom, remote door unlocking, and system configuration.
Up to 2,000 users and 10,000 access cards can be stored on the system, making it scalable for small apartment or multi-dwelling setups. It also supports up to 16 indoor extensions, allowing multi-room connectivity.
The kit supports Hik-Connect app integration, enabling push notifications and remote two-way communication when visitors press the call button.
Everything required for setup is included in the box: the door station, indoor station, power supplies, and accessories.
Key Features
-
2 MP (1920 × 1080) HD video door station
-
Wide 131° horizontal field of view
-
120 dB WDR and IR illumination up to ~3 m
-
Two-way audio with noise suppression and echo cancellation
-
IP65 outdoor protection for door station
-
4.3″ touch-screen indoor monitor
-
Supports up to 2,000 users and 10,000 card IDs
-
Up to 16 linked indoor monitors
-
Includes two power supplies in the kit
-
Mobile app integration via Hik-Connect
-
Relay output for electric strike or gate control
-
Operating temperature: -40 °C to +55 °C
USEFUL VIDEOS
Specifications Table
| Attribute | Specification |
|---|---|
| Model Number | DS-KIS606-P |
| Camera (Door Station) | 2 MP (1920 × 1080) |
| Field of View (H/V) | 131° / 78° |
| IR Range | Up to 3 m |
| WDR | 120 dB |
| Display (Indoor) | 4.3″ capacitive touch screen |
| User Capacity | 2,000 users |
| Card Capacity | 10,000 cards |
| Linked Indoor Stations | Up to 16 |
| Protection Rating | IP65 (door station) |
| Power Supply | 12 V DC or PoE (IEEE 802.3af) |
| Power Consumption | < 10 W |
| Operating Temperature | –40 °C ~ +55 °C |
Installation Instructions (Step-by-Step)
1. Pre-Install Setup
-
Plan cable runs for both door station and indoor monitor.
-
Use Cat6 network cable for both video and power transmission (PoE).
-
Confirm location of the main network point and ensure it is within 100 m of the door station.
2. Mounting the Door Station
-
Mount height should be 1.4–1.6 m from ground to capture accurate facial images.
-
Use supplied backplate and ensure mounting surface is flat.
-
Feed Cat6 cable through waterproof gland.
-
Connect Ethernet (PoE) and any optional lock control wires (NO/NC relay).
-
Seal cable entry and wall junction with silicone to maintain IP65 weatherproof rating.
3. Installing the Indoor Monitor
-
Mount the 4.3″ screen at an accessible height (~1.4 m).
-
Connect the indoor monitor via Cat6 cable to the same network or PoE switch.
-
Power either via 12 V DC (included adapter) or PoE port.
4. Network Setup
-
Connect both devices to your LAN (router or switch).
-
Use a PC with SADP Tool to find and activate devices.
-
Set static IP addresses in the same subnet.
-
Link indoor and outdoor stations via iVMS-4200 or directly through the indoor monitor UI.
5. Hik-Connect App Setup
-
Add the indoor monitor to the Hik-Connect app using the QR code displayed on screen.
-
Test video call, unlock relay, and push notifications.
6. Final Testing
-
Check video clarity (day/night).
-
Test call function, unlock relay, and tamper alarm.
-
Verify network connectivity remains stable for at least 24 hours before commissioning.
Installer Notes
-
Keep PoE cable runs under 100 m.
-
Always seal outdoor cable entry points and avoid facing direct rain or sunlight.
-
Do not share power supplies between intercom and heavy-load PoE cameras.
-
Perform firmware updates during setup to ensure latest compatibility.
-
Change all default passwords before handover.






















