Product SKU: C1310-E
Product Overview
For sites requiring authoritative outdoor voice coverage without separate amplifier hardware, the AXIS C1310-E Mk II is an all-in-one network horn speaker built for perimeters, loading docks, industrial yards, and open public areas. Featuring a built-in 7 W Class D amplifier and DSP, it delivers over 121 dB of sound pressure through a single PoE connection, eliminating the need for external audio equipment. Equipped with AXIS Audio Manager Edge pre-installed, it supports zone control, scheduling, and pre-recorded announcement playback across large networked deployments. It also includes a built-in microphone enabling two-way communication and remote health testing so operators can confirm the speaker is functioning without a physical site visit. With an IP66/IP67 and NEMA 4X rating, MIL-STD-810G/H testing, and an operating range of -40 degrees C to +60 degrees C, the C1310-E Mk II is rated for demanding coastal, industrial, and outdoor environments where reliable voice projection matters.
Key Capabilities
121 dB+ Sound Output
With a maximum sound pressure level exceeding 121 dB and a built-in 7 W Class D amplifier, the C1310-E Mk II projects intelligible voice across large open areas including car parks, industrial yards, and perimeter fence lines, even in high ambient noise conditions.
Single-Cable PoE Installation
Power and network connectivity are delivered through a single RJ-45 connection using PoE IEEE 802.3af/at Type 1 Class 3. This removes the need for separate power runs, making installation at elevated or remote outdoor mounting positions significantly more straightforward.
Directional Coverage Pattern
The horn delivers approximately 70 degrees horizontal by 100 degrees vertical coverage at 2 kHz. This directional dispersion focuses audio output toward a defined zone rather than scattering it broadly, making it suited for entry points, loading bays, and access corridors where targeted voice reach matters.
Two-Way Audio and Remote Health Testing
The built-in microphone supports live two-way communication through compatible systems and enables remote health monitoring. Operators can verify the speaker is functioning correctly without a physical inspection, which reduces maintenance overhead on multi-site or remotely managed installations.
AXIS Audio Manager Edge Pre-Installed
Audio management software is embedded on the device, supporting zone configuration, scheduled playback, and event-triggered announcements. It can manage up to 200 speakers across 20 zones without requiring a dedicated server, keeping infrastructure costs lower for larger deployments.
Industrial-Grade Environmental Rating
Rated IP66/IP67, NEMA 4X, and MIL-STD-810G/H tested, with an operating temperature range of -40 degrees C to +60 degrees C, this speaker is built for coastal, industrial, and extreme-climate deployments where standard outdoor enclosures would be inadequate.
Best For
- Perimeter and Entry Deterrence: The 121 dB+ output and directional horn pattern make this speaker effective for projecting live or automated warnings toward approaching individuals at fence lines, gates, and controlled entry points.
- Industrial and Loading Dock Environments: The MIL-STD-810G/H rating, NEMA 4X enclosure, and extreme temperature tolerance allow deployment in warehouses, loading bays, and outdoor industrial areas where moisture, dust, and temperature swings are ongoing concerns.
- Campus and Public Area Announcements: AXIS Audio Manager Edge supports zone-based scheduling and pre-recorded content, making the C1310-E Mk II suited for schools, transport hubs, and public precincts needing managed broadcast capability across multiple speaker locations.
- Integrated Axis Camera and Analytics Systems: SIP/VoIP support and compatibility with Axis network cameras and VMS platforms allow the speaker to function as a responsive deterrence output when surveillance triggers are detected, tying audio action directly to camera-based events.
Why Choose the AXIS C1310-E Mk II
The C1310-E Mk II separates itself from standard outdoor horn speakers by combining a built-in Class D amplifier, DSP, and AXIS Audio Manager Edge into a single PoE-powered unit. There is no requirement for a separate amplifier cabinet, audio controller, or dedicated power circuit, which reduces both installation cost and ongoing hardware complexity. The built-in microphone adds a capability that passive horn speakers cannot match: real-time two-way communication and the ability to test speaker health remotely across distributed sites. The IP66/IP67 and NEMA 4X ratings combined with MIL-STD-810G/H testing put this in a different category from consumer-grade or entry-level outdoor speakers, particularly for coastal, corrosive, or temperature-extreme environments. The Axis Edge Vault cybersecurity element, signed firmware, and secure boot further distinguish it for deployments where network security is a requirement. The AXIS C1310-E Mk II is available at Security Wholesalers as part of the Axis Communications audio range.
Buyer Decision Tips
Mounting Position and Coverage Angle: The C1310-E Mk II has a directional pattern of approximately 70 degrees horizontal by 100 degrees vertical at 2 kHz. Before mounting, confirm the horn is aimed toward the zone requiring coverage. For wide open areas needing broader horizontal spread, consider whether a single unit covers the required arc or whether multiple units are needed at different angles. Mounting height and tilt angle both affect how well voice reaches ground level across the target distance.
Network and SIP Integration Planning: The C1310-E Mk II connects directly to an IP network and supports SIP/VoIP for live voice and event-triggered playback. If integrating with an existing VMS or access control platform, confirm that the system supports ONVIF or SIP before deployment. For larger rollouts using AXIS Audio Manager Edge zone management, plan zone groupings and scheduling logic before installation to avoid reconfiguration after the units are mounted.
Key Features & Technical Specifications
| Model |
AXIS C1310-E Mk II (Part No. 02813-001) |
| Product Type |
Outdoor Network Horn Speaker |
| Amplifier |
Built-in 7 W Class D amplifier |
| Maximum Sound Pressure Level |
Over 121 dB |
| Frequency Response |
280 Hz to 12.5 kHz |
| Coverage Pattern |
Approx. 70 degrees (H) x 100 degrees (V) at 2 kHz |
| Power Supply |
PoE IEEE 802.3af/at Type 1 Class 3 (max approx. 12.95 W) |
| Network Interface |
RJ-45 10BASE-T / 100BASE-TX PoE |
| Built-In Microphone |
Yes, supports two-way audio and remote health testing |
| Audio Management Software |
AXIS Audio Manager Edge pre-installed |
| Outdoor Rating |
IP66 / IP67 / NEMA 4X / MIL-STD-810G/H |
| Operating Temperature |
-40 degrees C to +60 degrees C |
| Memory |
1 GB RAM / 1 GB Flash |
| Cybersecurity |
Axis Edge Vault secure element, signed firmware, secure boot |
| Dimensions (with bracket) |
Approx. 164 x 225 x 305 mm |
| Weight |
Approx. 1.3 kg |
Ideal Use Cases
Perimeter Security and Intruder Deterrence
The directional horn and 121 dB+ output allow operators to broadcast live or pre-recorded warnings at detected intrusion points. Integration with Axis cameras or analytics means the speaker can be triggered automatically when a surveillance event is confirmed, without requiring manual operator intervention.
Loading Docks and Logistics Areas
High ambient noise in loading environments often makes standard speakers ineffective. The C1310-E Mk II’s 121 dB ceiling and DSP-based voice clarity ensure safety instructions and access alerts remain audible for vehicle operators and ground workers in busy dock areas.
School and Campus Announcements
AXIS Audio Manager Edge supports up to 200 speakers across 20 zones, allowing campuses to run scheduled bell tones, zone-specific announcements, and emergency broadcasts from a centralised management interface without server infrastructure.
Industrial Yards and Harsh Outdoor Sites
The MIL-STD-810G/H testing, NEMA 4X enclosure, and -40 degrees C to +60 degrees C operating range make the C1310-E Mk II suitable for mining sites, waste facilities, ports, and other industrial locations where temperature extremes, dust, and moisture are routine conditions.
Car Parks and Open Public Areas
For multi-level car parks and outdoor public spaces, the single PoE cable requirement simplifies routing to elevated mounting positions. Scheduled or event-driven announcements can address pedestrian safety, access restrictions, and emergency guidance without manual on-site operation.
Choosing the Right Model
- Choose this model if: You need a self-contained outdoor network speaker with a built-in amplifier, DSP, and pre-installed audio management software, powered by a single PoE cable, rated for harsh weather and extreme temperatures, and capable of two-way communication and remote health testing.
- Choose a different model if: Your application requires high-fidelity background music reproduction across wide frequency ranges. The C1310-E Mk II is optimised for voice intelligibility and announcements, not broad-spectrum audio playback. A network ceiling or surface speaker designed for music zones would be more appropriate for those environments.
- Choose a different model if: Your installation is fully indoors in a low-noise environment where the 121 dB maximum output would exceed safe levels at close range. A lower-output indoor network speaker would be a more proportionate choice for reception areas, corridors, or internal retail spaces.
FAQs
- Does the AXIS C1310-E Mk II require a separate amplifier or control unit?
No. The unit contains a built-in 7 W Class D amplifier and digital signal processor. All power and network connectivity are delivered through a single PoE cable rated to IEEE 802.3af/at Type 1 Class 3. There is no requirement for an external amplifier cabinet, audio receiver, or dedicated controller, which significantly simplifies installation in outdoor or elevated mounting positions.
- How does the built-in microphone work and what is it used for?
The built-in microphone serves 2 functions. First, it enables two-way audio communication when the speaker is used with a compatible SIP or VMS platform, allowing operators to speak to and hear from people near the unit. Second, it supports remote health testing, where the system can use the microphone to verify the speaker driver is producing sound correctly, confirming operational status without a physical site visit.
- What outdoor environments is this speaker rated for?
The C1310-E Mk II carries IP66 and IP67 ingress protection ratings, NEMA 4X corrosion resistance, and MIL-STD-810G/H environmental testing certification. It operates between -40 degrees C and +60 degrees C. These ratings make it suitable for coastal installations, industrial yards, ports, and sites exposed to dust, moisture, temperature extremes, and vibration.
- What is AXIS Audio Manager Edge and does it need a separate server?
AXIS Audio Manager Edge is an audio management application that runs directly on the speaker’s onboard hardware, using the 1 GB RAM and 1 GB Flash memory built into the device. It supports zone grouping, scheduled playback, and event-triggered announcements for up to 200 speakers across 20 zones. Because it runs on the device itself, no dedicated server or additional software licence is required for standard deployments.
- Can this speaker integrate with existing VMS or Axis camera systems?
Yes. The C1310-E Mk II supports SIP and VoIP protocols, enabling integration with compatible VMS platforms and IP PBX systems. It can also be configured to respond to event triggers from Axis network cameras or analytics systems, so a confirmed camera event can automatically initiate a pre-recorded announcement or open a live audio channel to the speaker.
- What coverage area does the directional horn provide?
The horn produces a dispersion pattern of approximately 70 degrees horizontal by 100 degrees vertical at 2 kHz. This directional pattern concentrates output toward a defined area rather than distributing audio broadly in all directions. Effective intelligible speech range depends on ambient noise levels at the site, but the 121 dB+ maximum output supports clear voice projection across extended distances in open outdoor spaces. Security Wholesalers can provide guidance on speaker placement for specific site layouts.
- What cybersecurity protections are built into this speaker?
The C1310-E Mk II includes Axis Edge Vault, a dedicated hardware security module that protects device credentials and cryptographic keys. Signed firmware verification and secure boot are also implemented, ensuring the device only runs authenticated software. These features address network security requirements for deployments in government, education, healthcare, and other regulated environments where endpoint integrity is a specification requirement.
Additional Information
© Security Wholesalers Australia. All rights reserved. https://www.securitywholesalers.com.au/product/axis-c1310-e-mk-ii-network-horn-speaker-outdoor-poe/ 
