Product SKU: DS-2CD2086G2H-I2U-SL
Product Overview
The DS-2CD2086G2H-I2U-SL from Hikvision is an 8 megapixel (3840 × 2160) fixed bullet network camera tailored for demanding exterior surveillance environments where clarity meets action. Equipped with a 1/1.8″ progressive-scan CMOS sensor and “Powered by DarkFighter” technology, it offers exceptional low-light performance. Combined with the full suite of AcuSense human/vehicle analytics, a built-in strobe light, audio alarm functions and two-way audio (depending on variant), this model delivers proactive protection rather than just passive recording. With an IP67-rated, rugged housing and wide dynamic range handling, it’s engineered for harsh Australian outdoor conditions.
Why Choose the DS-2CD2086G2H-I2U/S(L)(RB)
Selecting the DS-2CD2086G2H-I2U/S(L)(RB) means investing in intelligent surveillance that does more than “see” — it acts. Its 8 MP resolution captures detailed scenes, while the AcuSense engine concurrently filters out irrelevant motion (for example animals or shadows), focusing only on human and vehicle targets, meaning fewer false alarms and smarter alerts. The built-in strobe and audio deterrent turn the camera into an active security asset, while its advanced imaging technology ensures reliability under challenging lighting (strong backlight, low light, glare). Built for outdoors with robust dust and water resistance, it’s a powerful solution for perimeters, car parks, warehouse yards and gated residential sites.
Key Capabilities
8 MP Ultra-High Resolution Imaging
The camera captures imagery at 3840 × 2160 resolution, providing rich detail across wide coverage areas and enabling clearer identification of subjects, vehicles or incidents.
Low-Light & “DarkFighter” Performance
Equipped with advanced sensor and lens technology, the camera delivers excellent colour fidelity even in very low ambient light, ensuring useful footage around the clock.
Deep-Learning Analytics (Human & Vehicle Classification)
AcuSense analytics embedded in the unit enable precise detection of people and vehicles — reducing irrelevant triggers and focusing your security on meaningful events.
Active Deterrence with Strobe & Audio Alarm
The strobe light and built-in audio alarm respond automatically when a qualified event is detected, turning the camera into an active deterrent rather than passive surveillance.
Two-Way Audio & Built-in Microphone (variant dependent)
Some variants include a microphone and speaker for live voice communication — ideal for visitor management, gate control or remote monitoring.
Robust Outdoor Design
With IP67 rating, all-metal housing and wide operating temperature range, the camera is built to survive harsh environments, including rain, dust and temperature extremes.
Wide Dynamic Range & Strong Contrast Handling
Built-in 120 dB WDR ensures scene clarity even with bright sunlight entering shaded areas, making it well-suited for entrances, driveways or mixed lighting zones.
Flexible Deployment & Power Options
Supports both 12 V DC and PoE power (dependent on model) for flexible integration into existing infrastructure or new installations.
Key Features
-
8 MP/4K Capture: Enables ultra-clear resolution and detailed forensic imagery across the scene.
-
AcuSense Human & Vehicle Classification: Automatically distinguishes between human and vehicle targets to streamline monitoring and alerting workflows.
-
Built-in Strobe Light & Audio Alarm: Delivers a visible flash and sound alert to intruders when triggered — actively deterring unwanted access.
-
Excellent Low-Light & Backlight Performance: Using DarkFighter sensor and 120 dB WDR, the camera delivers clear video across a range of lighting conditions.
-
Two-Way Audio (Model Dependent): Allows voice communication directly through the camera — facilitating gate access, visitor interaction or security announcements.
-
IP67 Rated Rugged Housing: Dust-tight and highly weather-resistant for reliable outdoor deployment in Australian conditions.
Specifications Summary
| Feature |
Specification |
| Image sensor |
1/1.8″ progressive-scan CMOS |
| Max resolution |
3840 × 2160 (8 MP) |
| Minimum illumination |
Colour 0.0008 Lux @ F1.0 (AGC ON); 0 Lux with strobe/illumination |
| Lens options |
Fixed 2.8 mm or 4 mm |
| DORI (2.8 mm) |
Detect 89 m / Observe 35 m / Recognise 17 m / Identify 8 m |
| DORI (4 mm) |
Detect 109 m / Observe 43 m / Recognise 21 m / Identify 10 m |
| Wide Dynamic Range |
120 dB WDR |
| Video compression |
H.265 / H.265+ / H.264 / H.264+ |
| Audio |
Built-in microphone and speaker (two-way audio; model dependent) |
| On-board storage |
microSD slot (up to 512 GB) |
| Networking |
RJ-45 10/100 Mbps Ethernet, IPv4/IPv6, ONVIF Profiles S/T/G |
| Protection |
IP67 rated housing, –30 °C to +60 °C operating range (approx.) |
| Power |
12 V DC or PoE (IEEE 802.3at Class 4) – depending on variant |
| Dimensions & Weight |
Ø74.4 mm × 176.3 mm; approx. 505 g |
| Deep-learning features |
Human/vehicle classification, face capture, perimeter protection (line crossing/intrusion/area enter-exit), linkage to strobe & audio alarm |
Ideal Use Cases
- Commercial Perimeters & Warehouses – The 8 MP resolution provides long-range coverage while the analytics and deterrence capabilities protect large outdoor zones.
- Retail Parking Lots & Car Dealerships – Active strobe and audio alarms coupled with clear full-colour imaging help deter theft and vandalism in high value outdoor display areas.
- Residential Gated Estates – Two-way audio and smart detection allow for secure access control and remote visitor interaction at driveways or gates.
- High-Contrast Entryways – With 120 dB WDR, this camera handles both bright and shadowed areas (eg. building entrances, loading docks) maintaining clear detail across conditions.
- Unmanned Remote Sites – With smart analytics, local recording and active deterrence built-in, the camera delivers high reliability even without constant supervision.
Choosing Between the 2.8 mm and 4 mm Lens
The DS-2CD2086G2H-I2U/S(L)(RB) offers two fixed-lens options — 2.8 mm and 4 mm — allowing you to tailor your coverage zone:
| Lens |
Field of View |
Best For |
Notes |
| 2.8 mm |
~105° H |
Wide area monitoring |
Ideal for open spaces, building façades, general outdoor zones. |
| 4.0 mm |
~90° H |
Narrow zone focus |
Better for entrances, corridors, long-range observation. |
Tip:
Choose 2.8 mm for broad situational coverage.
Choose 4 mm when you require more distant detail or narrower field.
FAQs
- Does this camera capture colour in very low light?
Yes — the “Powered by DarkFighter” sensor and large-aperture optics allow excellent low-light performance. In sufficiently dark conditions the built-in strobe/illumination enables full-colour capture rather than traditional IR black-and-white.
- How does the strobe and audio alarm work?
When the AcuSense system detects a human or vehicle, the camera triggers its strobe flash and audible alarm automatically to deter unwanted activity. You can also configure zones and schedules for alarm behaviour.
- Can I use this with an existing NVR?
Yes — The camera supports ONVIF profiles S/T/G, standard network and compression codecs, making it compatible with many third-party network video recorders or video management systems.
- Is it suitable for harsh outdoor environments?
Yes — With IP67 rating, all-metal housing and operating temperature range down to –30 °C, it is built to withstand dust, rain, salt spray and extreme temperature swings typical of outdoor Australian sites.
- Does it support local recording?
Yes — It includes a microSD card slot that supports up to 512 GB (subject to variant) for on-device local backup if network connection is interrupted.
Additional Information
DS-2CD2086G2H-I2U_SLRB_Datasheet
Product Video Samples
NOTE: For best viewing quality, select 2160p resolution in YouTube’s settings.
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Authorised Hikvision Store
Authorised Hikvision Partner
As a Trusted Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
