Product SKU: TP3601
Product Overview
For installers who route camera cabling through conduit systems, the AXIS TP3601 3/4″ Conduit Adapter provides a purpose-built interface that connects conduit runs directly to Axis camera mounting points. Featuring a 3/4″ conduit entry and a 4-point mounting design, the TP3601 allows cable to pass cleanly from wall or ceiling conduit into the camera mount, eliminating exposed cable runs and protecting wiring from mechanical damage, moisture ingress, and tampering. It is compatible with a range of Axis dome and bullet camera accessories and suits both indoor and outdoor environments. This makes the TP3601 a practical component in structured, compliant installations across commercial buildings, industrial sites, and external camera positions where conduit wiring is required or specified by the project brief.
Key Capabilities
3/4″ Conduit Interface
The TP3601 accepts standard 3/4″ conduit, allowing installers to route camera cabling directly through conduit runs into the mounting point. This eliminates exposed cable at the camera head and supports tidy, professional finishes on structured cabling projects.
4-Point Mount Design
The 4-point mounting hole pattern distributes load evenly across the mounting surface, providing a stable and secure base for the camera and associated hardware. This is particularly important in locations subject to vibration or where long-term structural integrity is a requirement.
Indoor and Outdoor Suitability
The TP3601 is designed for use in both indoor and outdoor environments. It works with conduit systems across a range of installation conditions, from office ceilings and internal corridors to external walls and under-eave positions where conduit is used for cable protection.
Axis Ecosystem Compatibility
Built to integrate with Axis camera mounting accessories and junction boxes, the TP3601 fits within the broader Axis mounting ecosystem. This simplifies procurement on projects where Axis cameras and accessories are already specified, avoiding the need for third-party adapters or custom fabrication.
Best For
- Conduit-Wired Installations: Installers working with conduit runs on commercial or industrial projects where exposed cable at the camera head is not acceptable or does not meet site cabling standards.
- Outdoor Camera Positions: External installations where cable must be protected from environmental exposure, moisture, and mechanical interference from the conduit entry point through to the camera mount.
- Structured Enterprise or Government Projects: Facilities requiring compliant, tidy cabling infrastructure where conduit termination at camera mounting points is part of the project specification.
Why Choose the AXIS TP3601
The AXIS TP3601 addresses a specific requirement that generic mounting hardware does not: a clean, secure transition from a 3/4″ conduit run into an Axis camera mount using a 4-point fixing pattern. A basic bracket or surface mount will not accommodate conduit entry, leaving cable exposed at the mount and requiring additional cable management. The TP3601 is engineered as part of the Axis mounting accessory range, meaning it is dimensionally matched to Axis junction boxes and camera bases rather than requiring compromise or rework on site. It suits both ceiling and wall conduit entry points and performs across indoor and outdoor conditions. Available through Security Wholesalers, the TP3601 is a straightforward procurement choice for integrators who want mounting hardware that is compatible with Axis infrastructure from the start.
Buyer Decision Tips
Buyer Tip: Before ordering, confirm that your conduit run uses 3/4″ conduit and that your specific Axis camera mount or junction box is listed as compatible with the TP3601. Axis offers multiple conduit adapter sizes and mounting configurations across its accessory range. Using the wrong adapter size will require rework on site, so verifying the conduit diameter and mount compatibility against the Axis accessory compatibility guide before installation is the most practical step.
Key Features & Technical Specifications
| Product Name |
AXIS TP3601 3/4″ Conduit Adapter |
| SKU |
TP3601 |
| Product Type |
Conduit adapter / camera mounting accessory |
| Conduit Size |
3/4″ |
| Mounting Configuration |
4-point mount |
| Compatible Equipment |
Axis dome and bullet camera accessories, Axis mounts and junction boxes |
| Installation Environment |
Indoor and outdoor |
| Primary Function |
Secure conduit cable entry and cable protection at camera mount point |
| Brand |
Axis Communications |
| Category |
AXIS Accessories |
Ideal Use Cases
Commercial Office Installations
Ceiling or wall-mounted Axis cameras in office environments often require conduit wiring to meet building services standards. The TP3601 provides the 3/4″ conduit entry point needed to terminate conduit runs cleanly at the camera mounting position.
Industrial and Warehouse Sites
In environments where cabling is exposed to mechanical risk or chemical exposure, routing camera cables through conduit to the TP3601 adapter protects wiring from the wall or ceiling surface all the way to the camera mount.
Outdoor Wall-Mounted Camera Positions
External cameras on rendered, brick, or masonry walls benefit from conduit entry that seals the cable path at the mount point. The TP3601 supports outdoor use and is compatible with Axis accessories typically used in external installations.
Government and Enterprise Facilities
Projects in government, education, and enterprise environments frequently specify conduit wiring for compliance and cable management. The TP3601 provides a compliant, structured termination point for Axis camera runs in these settings.
Choosing the Right Model
- Choose this model if: Your installation uses 3/4″ conduit for cable routing and you are mounting Axis cameras or accessories that require a 4-point fixing interface with a conduit entry point.
- Choose a different model if: Your conduit run uses a different diameter size, as the TP3601 is specifically designed for 3/4″ conduit and will not accept other conduit sizes without modification. Check the Axis mounting accessory range for adapters suited to other conduit diameters.
- Choose a different model if: Your project does not use conduit at all and cable is instead surface-routed or concealed within the wall cavity, in which case a standard Axis mount or junction box without a conduit adapter is more appropriate.
FAQs
- What conduit size does the AXIS TP3601 accept?
The TP3601 is designed for 3/4″ conduit. This is a standard conduit size used across commercial and industrial installations in Australia. If your conduit run uses a different diameter, you will need to check the Axis accessory range for an adapter that matches your conduit specification.
- What does the 4-point mount design mean in practice?
The 4-point mounting configuration means the adapter uses 4 fixing points to secure it to the mounting surface or junction box rather than a single central fixing. This distributes load across a wider footprint, reducing the risk of the mount loosening over time, which is particularly useful on surfaces subject to vibration or in positions where long-term stability is required.
- Can the TP3601 be used outdoors?
Yes. The TP3601 is suitable for both indoor and outdoor installations. When used outdoors, the conduit entry helps protect cables from moisture and environmental exposure at the camera mount point, which is one of the practical reasons conduit wiring is preferred for external camera runs on commercial sites.
- Which Axis cameras and mounts is the TP3601 compatible with?
The TP3601 is designed to work with Axis dome and bullet camera accessories, including compatible Axis mounts and junction boxes. For specific compatibility with a particular Axis camera model or mount combination, refer to the Axis compatibility documentation or contact the supplier to confirm before ordering. Security Wholesalers can assist with compatibility queries for Axis accessory combinations.
- Is the TP3601 suitable for installations that must meet structured cabling or compliance requirements?
Yes. The TP3601 is well suited to projects where structured cabling or site compliance standards require cable to be fully enclosed within conduit from the cable run through to the camera mounting point. Its 4-point fixing and conduit entry design support tidy, professional terminations that meet the expectations of commercial, government, and enterprise installation briefs.
Additional Information
No additional downloads available for this product.
