Product SKU: NVR-108MH-K-8P-B
Product Overview
Built around an 8-channel PoE architecture, the HiLook NVR-108MH-K/8P sits in the Pro Series range and is aimed at small to mid-sized installations where AI-driven analytics are a genuine requirement rather than a bonus. Featuring 8 built-in PoE ports, cameras connect directly to the recorder without separate power injectors or switches, keeping installations tidy and reducing points of failure. Equipped with Motion Detection 2.0, the NVR classifies humans and vehicles across all 8 channels, while a dedicated AI decoding pipeline supports 1-channel facial recognition via video stream or 4-channel face picture comparison. It outputs live and recorded footage at 4K resolution over HDMI and records at up to 8MP across connected cameras within an 80 Mbps total bandwidth envelope. H.265+ compression reduces storage overhead considerably, and the single SATA bay accommodates up to a 10TB surveillance-grade HDD. Remote monitoring is handled through the HiLookVision platform via app or web portal.
Key Capabilities
8 Built-In PoE Ports
Each of the 8 PoE ports powers and connects an IP camera over a single Cat5e or Cat6 cable. There is no need for a separate PoE switch or individual power adaptors, which simplifies rack or shelf installations and reduces cable management requirements at the recorder end.
Facial Recognition and Face Picture Comparison
The NVR-108MH-K/8P supports 1-channel facial recognition via live video stream or 4-channel face picture comparison. This capability allows operators to cross-reference detected faces against stored libraries, which is useful in access-controlled environments or retail settings tracking repeat visitors.
Motion Detection 2.0 Across All Channels
Human and vehicle classification runs across all 8 channels simultaneously. This means event-triggered recordings and alerts are filtered by object type rather than raw pixel change, reducing the volume of irrelevant footage that operators need to review after an incident.
4K HDMI and Full HD VGA Outputs
A 4K HDMI output at 3840×2160 allows operators to connect a large-format monitor and view footage at full resolution. The simultaneous VGA output at 1080p supports a secondary display, which is practical in monitoring rooms where a dedicated operator screen is needed alongside a wall-mounted overview display.
H.265+ Compression Up to 10TB Storage
H.265+ encoding reduces bitrate demand substantially compared to H.264, extending how far a single HDD can stretch. The SATA bay supports drives up to 10TB, which paired with H.265+ gives smaller installations meaningful retention periods before footage overwrites on a loop.
HiLookVision Remote Access
The HiLookVision platform provides remote live view, playback, and event notifications via mobile app or web browser. Installers can commission and monitor the recorder remotely, while end users can check camera feeds from any location with internet access, without requiring complex port-forwarding configuration.
Best For
- Retail and Hospitality Operators: The facial recognition capability allows face picture comparison across up to 4 channels, which is practical for identifying repeat offenders or tracking customer flow in a store or venue environment.
- Small Office or Commercial Sites: With 8 PoE channels, a single NVR-108MH-K/8P can cover a typical office floor plan, car park, or building entry, with human and vehicle detection filtering event logs to what actually matters.
- Residential Installations Needing AI: Homeowners or property managers who want more than basic motion recording get per-channel human and vehicle classification without moving to a larger or more complex recorder platform.
- Installers Commissioning Plug-and-Play Systems: The built-in PoE switch removes the need for a separate networking layer. Cameras auto-populate on connection, reducing on-site commissioning time for standard HiLook IP camera deployments.
Why Choose the NVR-108MH-K/8P
The NVR-108MH-K/8P is the AI-capable model in the HiLook 8-channel PoE lineup. Its facial recognition support, either 1-channel stream-based or 4-channel face picture comparison, is a step that entry-level recorders in the same channel class do not offer. The 4K HDMI output means footage is displayed at full resolution on a compatible monitor, and the AI decoding pipeline handles 1-channel at 8MP or 3 channels at 4MP simultaneously, which is sufficient for most small commercial deployments. The 80 Mbps total bandwidth supports 8MP cameras without throughput bottlenecks, and the 10TB SATA capacity gives operators meaningful storage headroom when combined with H.265+ compression. Available at Security Wholesalers, the NVR-108MH-K/8P is suited to buyers who need analytics-grade functionality from a compact, single-HDD recorder without moving up to an enterprise platform.
Buyer Decision Tips
Storage Planning: The NVR-108MH-K/8P has a single SATA bay, so storage capacity is limited to one drive up to 10TB. At 8 channels recording continuously in H.265+ at moderate resolution, a 10TB drive will provide several weeks of footage, but buyers expecting very long retention periods at high resolution should factor this constraint into their planning before purchase. The NVR ships without a HDD, so a surveillance-grade drive needs to be added separately.
AI Decoding Limits: Facial recognition operates on 1 channel at a time for video stream-based recognition, or across 4 channels for face picture comparison. If the installation requires simultaneous stream-based facial recognition across multiple channels, this recorder will not cover that requirement. Clarify with the end user whether face picture comparison across 4 channels is sufficient for their workflow before specifying this unit.
Key Features & Technical Specifications
| Model |
NVR-108MH-K/8P |
| Video Channels |
8 channels |
| Maximum Recording Resolution |
Up to 8MP |
| Incoming / Outgoing Bandwidth |
80 Mbps |
| AI Decoding Capability |
1-ch at 8MP or 3-ch at 4MP |
| Facial Recognition |
1-channel video stream-based or 4-channel face picture comparison |
| Motion Detection |
Motion Detection 2.0 with human and vehicle classification across all channels |
| HDMI Output |
4K (3840×2160) |
| VGA Output |
Full HD (1920×1080) |
| Video Compression |
H.265+ / H.265 / H.264+ / H.264 |
| PoE Ports |
8 built-in PoE ports |
| Storage Interface |
1 x SATA, up to 10TB HDD capacity |
| HDD Included |
No HDD included |
| Remote Access |
HiLookVision app and web portal |
| Audio |
RCA audio input and output ports |
| Operating Temperature |
-10°C to 55°C |
| Series |
HiLook Pro Series |
Ideal Use Cases
Retail Store Monitoring
The 4-channel face picture comparison function allows retail operators to build watchlists and receive alerts when flagged individuals appear on camera. Combined with human detection across all 8 channels, the NVR-108MH-K/8P supports stores where identifying specific visitors is a priority.
Office and Reception Coverage
With 8 PoE channels, an NVR-108MH-K/8P can cover entry points, corridors, parking, and reception areas in a single-building office setup. Facial recognition on the entry camera adds an identification layer beyond standard motion-triggered recording.
Residential Property Systems
Homeowners running up to 8 IP cameras benefit from human and vehicle classification that filters out irrelevant motion events. Remote access via the HiLookVision app means live and recorded footage is accessible from a phone without on-site access to the recorder.
Small Warehouse or Storage Facility
H.265+ compression and support for a 10TB HDD allows a warehouse operator to maintain continuous recording across 8 cameras while keeping footage for extended periods. Vehicle detection at loading dock cameras reduces false event logs caused by passing traffic.
Construction Site After-Hours Monitoring
Motion Detection 2.0 with human classification means after-hours intrusion events trigger recordings based on confirmed human presence rather than wind-affected vegetation or lighting changes. The NVR operates in temperatures from -10°C to 55°C, covering typical outdoor Australian site conditions.
Choosing the Right Model
- Choose this model if: Your installation requires AI-enabled recording with facial recognition or face picture comparison, human and vehicle classification across all 8 channels, 4K HDMI output, and plug-and-play PoE camera connectivity in a compact single-HDD unit.
- Choose a different model if: You need simultaneous stream-based facial recognition across more than 1 channel at a time, more than 8 camera connections, or more than 1 HDD bay for higher storage capacity or RAID redundancy. In those cases, a higher-channel or higher-specification NVR would be better suited to the deployment.
- Choose a different model if: The installation is purely basic, with no requirement for facial recognition or smart human and vehicle detection. A non-Pro Series 8-channel PoE NVR may deliver sufficient functionality at a lower cost for straightforward motion-only recording scenarios.
FAQs
- Does the NVR-108MH-K/8P come with a hard drive included?
No. The NVR-108MH-K/8P is supplied without a HDD. It has one SATA bay that accepts a single surveillance-grade drive up to 10TB. Buyers need to purchase a compatible HDD separately before the recorder can begin storing footage locally.
- How does facial recognition work on this NVR?
The NVR-108MH-K/8P supports 2 modes of facial recognition. The first is 1-channel stream-based recognition, where the NVR analyses live video from one camera to identify faces against a stored library. The second is 4-channel face picture comparison, where detected face images from up to 4 cameras are compared against a face database. These modes serve different workflows, so clarify which your use case requires before configuring the system.
- What is the total PoE power budget across the 8 ports?
The product data confirms 8 built-in PoE ports for plug-and-play camera connection, but a per-port or total PoE wattage figure is not specified in the available datasheet. Check the official HiLook NVR-108MH-K/8P datasheet for the confirmed PoE budget before connecting high-wattage cameras such as PTZ units or those with heaters.
- What cameras are compatible with the NVR-108MH-K/8P?
The NVR is designed to work with HiLook IP cameras using the HiLook protocol, and it is also compatible with Hikvision IP cameras and third-party cameras supporting ONVIF. AI features such as Motion Detection 2.0 with human and vehicle classification function most reliably when paired with HiLook or Hikvision cameras that support the required analytics at the camera level.
- How many channels can record at 8MP simultaneously?
The NVR supports up to 8MP recording resolution and has an 80 Mbps total bandwidth envelope. The AI decoding pipeline processes 1 channel at 8MP or 3 channels at 4MP with AI features active. All 8 channels can record, but AI decoding is limited to the figures above, so not all channels will have AI analytics processing active at maximum resolution simultaneously.
- Can I access footage remotely without a static IP address?
Yes. The HiLookVision platform uses cloud-based connectivity, which means remote access via the mobile app or web browser does not require a static IP address or manual port forwarding in most cases. The NVR needs to be connected to the internet via its network port, and a HiLookVision account is required to link the device. Security Wholesalers supplies this NVR as part of the HiLook Pro Series range, which is supported under the HiLookVision ecosystem.
- What happens when the HDD is full?
The NVR-108MH-K/8P operates on a loop recording basis by default. When the drive reaches capacity, the oldest footage is overwritten by new recordings. If footage retention is critical, buyers should size the HDD appropriately for the number of cameras, recording resolution, and required retention period before installation.
Additional Information
Hard Drives
HiLook Warranty
3-Year Manufacturer Warranty
All HiLook IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
