Product SKU: M1135-E
Product Overview
For installations where lens choice drives the design, the AXIS M1135-E Mk II delivers the flexibility of a CS-mount box camera in a housing rated to IP66, IK10, and NEMA 4X. Built for outdoor use in demanding environments including marine, chemical processing, and dust-heavy industrial sites, this 2MP camera records full HD 1080p at 30 fps with Axis Lightfinder technology for colour imaging down to 0.1 lux and Forensic WDR for high-contrast scenes. Equipped with a varifocal CS-mount lens and i-CS support for remote zoom and focus adjustment, installers can fine-tune the field of view without physical access to the camera head. It runs AXIS Object Analytics out of the box for people and vehicle detection, counting, and tracking. Redundant PoE and DC power inputs ensure the camera keeps operating even during partial power interruptions, making it a practical choice for critical infrastructure, utilities, and perimeter applications.
Key Capabilities
CS-Mount Lens with i-CS Remote Control
The box camera form factor accepts interchangeable CS-mount lenses, and i-CS compatible lenses allow zoom and focus to be adjusted remotely via software. This removes the need for a technician to physically reposition the camera head after mounting, which matters on high or restricted installations.
Lightfinder Low-Light Imaging
Axis Lightfinder technology produces full-colour video at illumination levels as low as 0.1 to 0.17 lux, with monochrome capability down to 0.02 to 0.03 lux. Outdoor sites with poor or inconsistent lighting, such as loading docks or entry lanes, benefit from this without requiring additional IR illuminators.
NEMA 4X and IP66/IK10 Protection
The NEMA 4X rating adds corrosion resistance beyond standard IP66 weatherproofing, making the M1135-E Mk II suitable for marine environments, chemical plants, food processing facilities, and other sites where salt air or cleaning agents are present. IK10 impact resistance provides additional protection against physical interference.
Redundant Power Inputs
The camera accepts both PoE Class 3 and a redundant 8 to 28 V DC power input. If one supply fails, the other maintains continuous operation. This is a meaningful capability for critical infrastructure and utilities sites where camera downtime is not acceptable.
AXIS Object Analytics Preinstalled
People and vehicle detection, classification, tracking, and counting are available out of the box through AXIS Object Analytics. Motion detection and tampering alarms are also included, enabling event-based recording and alert triggers without additional software licences.
Axis Edge Vault Cybersecurity
Axis Edge Vault provides secure boot, signed firmware, and a FIPS 140-3 Level 3 certified secure keystore. For government, utilities, and enterprise deployments with cybersecurity compliance requirements, this hardware-level protection goes beyond what standard network cameras offer.
Best For
- Industrial and Corrosive Environments: The NEMA 4X rating makes this camera suitable for chemical plants, marine facilities, food processing sites, and other areas where salt air, moisture, or cleaning chemicals could damage standard housings.
- Perimeter Entry and Access Points: The varifocal CS-mount lens and remote zoom capability allow installers to frame specific entry lanes or gate areas precisely, supported by AXIS Object Analytics for vehicle and people detection.
- Critical Infrastructure and Utilities: Redundant PoE and DC power inputs mean the camera maintains operation during power supply faults, which is essential for energy, transport, and telecommunications sites.
- Sites with Specific Lens Requirements: Installers who need a focal length outside the standard fixed options can fit the appropriate CS-mount lens for the exact field of view required, a flexibility not available with fixed-lens cameras.
Why Choose the AXIS M1135-E Mk II
The AXIS M1135-E Mk II separates itself from standard outdoor fixed cameras through its combination of CS-mount lens interchangeability, NEMA 4X corrosion resistance, and redundant power architecture. A typical outdoor bullet or turret camera uses a fixed or varifocal lens with no option to change the optic entirely. The M1135-E Mk II allows lens selection to match the exact throw distance and field of view the site demands, and i-CS support means that adjustment happens remotely. The FIPS 140-3 Level 3 certified Axis Edge Vault adds hardware-level cybersecurity that is increasingly required in enterprise and government procurement. Axis Lightfinder delivers genuine colour detail in near-dark conditions without the need for supplementary lighting. Available through Security Wholesalers, the M1135-E Mk II is suited to installers designing for demanding outdoor environments where a standard camera would fall short on protection, flexibility, or security compliance.
Buyer Decision Tips
Lens Selection: The M1135-E Mk II ships with a varifocal CS-mount lens, but its real value is the ability to fit a different CS-mount optic entirely if the default range does not suit your scene. Before ordering, confirm the distance to your target area and the required field of view, then match an appropriate CS or i-CS lens. If you intend to use remote focus and zoom, confirm the lens is i-CS compatible before purchase.
Power Architecture: If you are wiring the camera with PoE only, a standard PoE switch will work at Class 3. However, if the site warrants the redundant DC backup input, plan the secondary power cabling during initial installation rather than returning to site later. The operating temperature range of -20°C to 50°C covers most Australian outdoor conditions, but confirm for extreme northern or alpine sites.
Key Features & Technical Specifications
| Resolution |
2MP (1920×1080) Full HD |
| Frame Rate |
30 fps |
| Minimum Illumination (Colour) |
0.1 to 0.17 lux |
| Minimum Illumination (Monochrome) |
0.02 to 0.03 lux |
| Low-Light Technology |
Axis Lightfinder |
| Wide Dynamic Range |
Forensic WDR |
| Lens Type |
CS-mount varifocal (3-10.5mm or 3.5-10mm depending on variant); i-CS lens compatible |
| Horizontal Field of View |
Approximately 90° to 33° |
| Video Compression |
H.265, H.264 (Baseline/Main/High), Motion JPEG |
| Zipstream |
Yes – H.264 and H.265 |
| Video Streams |
Up to 20 simultaneous streams |
| Power |
PoE Class 3; Redundant 8-28V DC |
| Weatherproofing |
IP66, IK10, NEMA 4X |
| Operating Temperature |
-20°C to 50°C |
| Edge Storage |
MicroSD/SDHC/SDXC card slot |
| Analytics |
AXIS Object Analytics (people and vehicle detection, classification, tracking, counting); video motion detection; tampering alarm |
| Audio |
Audio input |
| Cybersecurity |
Axis Edge Vault; secure boot; signed firmware; FIPS 140-3 Level 3 certified secure keystore |
| Housing |
Outdoor box camera; repaintable housing |
| VMS Compatibility |
Axis Camera Station; third-party VMS via ONVIF |
Ideal Use Cases
Marine and Coastal Facilities
The NEMA 4X corrosion resistance rating addresses salt air degradation that would damage standard IP66-only cameras over time, making the M1135-E Mk II a practical long-term option for wharves, marinas, and coastal infrastructure.
Industrial and Chemical Plant Perimeters
NEMA 4X and IP66 ratings combined with an operating range of -20°C to 50°C allow this camera to handle both chemical exposure and temperature extremes found in manufacturing and processing facilities.
Critical Infrastructure Entry Points
Redundant PoE and DC power inputs keep the camera running during single-supply failures, which is a firm requirement for energy, utilities, and transport infrastructure where continuous surveillance cannot be interrupted.
Vehicle Entry Lanes and Loading Docks
AXIS Object Analytics provides vehicle detection and counting at entry points. The varifocal CS-mount lens with remote zoom allows the installer to frame a specific lane width precisely without repositioning the bracket after mounting.
Government and Enterprise Deployments
The FIPS 140-3 Level 3 certified Axis Edge Vault secure keystore and signed firmware meet cybersecurity procurement requirements that apply across government, defence-adjacent, and enterprise network environments.
Choosing the Right Model
- Choose this model if: Your site requires interchangeable CS-mount lenses to achieve the correct focal length, the environment involves corrosive exposure that demands NEMA 4X housing, you need redundant power inputs for continuous operation, or your procurement requires FIPS 140-3 certified cybersecurity hardware.
- Choose a different model if: A fixed-lens outdoor turret or bullet camera covers your focal length requirements and your site does not have corrosion or power redundancy concerns. A fixed-lens model at the same resolution will typically offer a simpler installation and lower upfront cost where lens interchangeability is not needed.
FAQs
- What does the NEMA 4X rating mean and why does it matter for this camera?
NEMA 4X extends beyond standard IP66 weatherproofing to include resistance to corrosion from salt air, chemicals, and cleaning agents. For the M1135-E Mk II, this means it can be installed in marine environments, food processing facilities, and chemical plants where a standard IP66 housing would degrade over time.
- Can I use any CS-mount lens with this camera?
The camera accepts CS-mount lenses, which gives you flexibility to choose the focal length suited to your scene. If you want to adjust zoom and focus remotely through software without physical access, you will need an i-CS compatible lens. Standard CS-mount lenses require manual optical adjustment.
- How does the redundant power input work in practice?
The M1135-E Mk II accepts both PoE Class 3 from a network switch and a secondary 8 to 28 V DC power input. If either supply is interrupted, the camera continues operating on the remaining source. This requires the DC cable to be connected during installation and is not automatic without both supplies being wired.
- What analytics are available without additional licences?
AXIS Object Analytics is preinstalled and covers human and vehicle detection, classification, counting, and tracking. Video motion detection and tampering alarms are also included at no extra cost. More complex analytics applications can be added via the Axis application platform.
- What is Axis Edge Vault and does it affect day-to-day operation?
Axis Edge Vault is a hardware-based cybersecurity platform that provides secure boot, signed firmware verification, and a FIPS 140-3 Level 3 certified secure keystore for credential storage. It operates in the background and does not affect normal camera use, but it provides assurance that the device has not been tampered with and that credentials are stored securely.
- Does the camera produce colour video at night without additional lighting?
Yes. Axis Lightfinder technology enables colour imaging at illumination levels as low as 0.1 to 0.17 lux, which covers most outdoor environments with minimal ambient light such as street lighting or industrial yard lighting. In complete darkness below this threshold, it switches to monochrome imaging down to 0.02 to 0.03 lux.
- What VMS platforms does the M1135-E Mk II work with, and is it available locally?
The camera integrates natively with Axis Camera Station and supports third-party VMS platforms through ONVIF. For organisations running existing VMS infrastructure, confirm ONVIF profile compatibility with your VMS vendor. The M1135-E Mk II is part of the Security Wholesalers range and is available for local purchase and project support in Australia.
Additional Information
