Product SKU: DS-2CD3H66G2H-LIZSUY-SL
Product Overview
The DS-2CD3H66G2H-LIZSUY-SL is a high-performance network turret camera from Hikvision’s Ultra Series, engineered for demanding outdoor and perimeter surveillance. Equipped with a 1/1.8″ progressive scan CMOS sensor and a resolution of up to 3200 × 1800, it delivers crisp, clear video across a wide field of view. The camera incorporates a motorised varifocal lens (2.7–13.5 mm) for flexible coverage and features Smart Hybrid Light dual-illumination (IR and white-light) to ensure effective visibility up to approximately 40 metres, even under low-light conditions. Ruggedised to IP67 and IK10 standards and built on an intelligent analytics platform, it’s purpose-built for high-traffic, high-risk installations.
Why Choose the DS-2CD3H66G2H-LIZSUY-SL
This model is ideal when you need a camera that combines resolution, intelligent analytics and flexible deployment. The large sensor and high resolution support wide-area coverage with sufficient detail to identify people and vehicles. The motorised varifocal lens gives you installation flexibility—allowing zooming in or out remotely to suit your site. The Smart Hybrid Light system enables full-colour or IR imaging depending on scene requirements, and the built-in deep-learning analytics platform supports human and vehicle classification for more accurate event detection. With robust housing certified for weather and vandal resistance, the DS-2CD3H66G2H-LIZSUY-SL is a strong choice for commercial facilities, transport hubs, retail perimeters and outdoor entrances.
Key Capabilities
High-Resolution Imaging
The camera supports up to 3200 × 1800 resolution, allowing broad scene coverage while retaining enough detail for identification and analytics—useful for carparks, entryways and large façades.
Motorised Varifocal Lens (2.7–13.5 mm)
With remote zoom and focus adjustment, installers can fine-tune viewing angles without physically repositioning the camera—ideal for evolving site requirements.
Smart Hybrid Light Illumination
Combining infrared and white-light LEDs, the camera adapts to lighting conditions to provide clear images up to approx. 40 metres, giving strong performance in dusk or night conditions.
Edge AI & Analytics Platform
Powered by the HEOP 2.0 platform with 1.5 TOPS compute and on-board deep-learning, the camera supports human/vehicle classification and event filtering, reducing false alarms and improving detection accuracy.
Rugged Build & Wide Dynamic Range
The combination of IP67 weather resistance, IK10 vandal rating and high-contrast scene handling makes this camera suited to outdoor, high-risk, or high-traffic sites where durability and clarity matter.
Key Features
-
Dual-Illumination (IR + White-Light): Automatically switches between modes, ensuring effective coverage in both total darkness and complex lighting conditions.
-
Motorised Varifocal 2.7–13.5 mm Lens: Enables wide to tele coverage, fitting multiple deployment types with one camera and simplifying inventory.
-
On-Board Deep-Learning Analytics: Built-in human and vehicle classification improves operational efficiency by filtering out irrelevant motion and focusing on meaningful events.
-
High-Contrast Handling (WDR): Maintains image clarity in scenes with strong light/dark contrasts (e.g., building entries, glass façades) for effective monitoring.
Specifications Summary
| Feature |
Specification |
| Resolution |
Up to 3200 × 1800 |
| Lens |
Motorised Varifocal 2.7–13.5 mm |
| Field of View (H-FOV) |
Approx. 112° (wide) to 41° (tele) |
| Illumination Range |
Smart Hybrid Light up to approx. 40 m |
| Protection Rating |
IP67 weather-proof, IK10 vandal-resistant |
Ideal Use Cases
- Commercial & Retail Perimeters – Monitor building exteriors, storefront edges and parking zones with high resolution and smart lighting.
- Transport Hubs – Train stations, bus terminals and airport concourses where wide-area coverage, vandal resistance and analytics are crucial.
- Industrial Yards & Facilities – Outdoor installations requiring major durability, flexible lens coverage and consistent night-time visibility.
- High-Traffic Entrances – Lobby zones, drop-off areas or building façades where contrast between interior/exterior light is high and accurate coverage is needed.
Understanding the Motorised Varifocal Lens
A motorised varifocal lens allows remote adjustment of zoom and focus, enabling one camera installation to cover either wide scenes or detailed zones without hardware changes. With the 2.7–13.5 mm range, you can shift from broad-area coverage (wide) to narrowed long-range views (telephoto). This provides installers and security professionals with flexibility to adapt the camera as site needs change — perfect for evolving environments, multi-purpose use and professional surveillance setups.
| Zoom Position |
Approx. Field of View |
Best For |
| Wide (2.7 mm) |
~112° H |
Open areas, car parks, building fronts |
| Telephoto (13.5 mm) |
~41° H |
Gates, driveways, long corridors, targeted analytics zones |
Tip:
Choose the wide end (2.7 mm) for broad-area monitoring; choose the telephoto end (13.5 mm) when you need detailed long-range coverage or object identification.
FAQs
- Can this camera capture good night-time colour video?
Yes. With Smart Hybrid Light (IR + white-light) it adapts to lighting conditions, delivering colour video in low light and infrared monochrome when necessary—helping maintain awareness and detail at night.
- Does the lens support remote adjustment post-installation?
Yes. The motorised 2.7–13.5 mm varifocal lens allows zoom and focus to be refined via software, enabling better coverage or adaptation over time without swapping the camera.
- Is the camera suitable for outdoor high-risk environments?
Absolutely. The IP67 and IK10 ratings mean it is protected against dust, water ingress and physical impact. With the Ultra Series’ outdoor design, it is well suited for installation in exposed locations, heavy-traffic zones and critical infrastructure sites.
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 3-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
Authorised Hikvision Store
Authorised Hikvision Partner
As a Trusted Hikvision Authorised Store, SecurityWholesalers.com.au is more than just a reseller — we’re a nationally recognised partner delivering genuine Hikvision solutions, backed by expert technical support and deep industry knowledge.
Our team supports systems across all major sectors — including residential homes, commercial businesses, schools, government infrastructure, warehouses, and local councils. When you choose us, you’re selecting a Hikvision-certified partner with a proven track record in performance, reliability, and customer satisfaction.
- Official Hikvision Product Support
Get access to genuine Hikvision technical resources and support, delivered by trained professionals who work with these systems daily.
- Comprehensive System Assistance
From product selection to setup, configuration, remote access support, and firmware upgrades — we offer step-by-step guidance to ensure your system is optimal.
- Reliable After-Sales Service
We provide continued support for configuration, troubleshooting, and warranty claims. Whether you’re a first-time user or a seasoned installer, we ensure your Hikvision system operates flawlessly.
- Genuine Products & Fast Dispatch
All Hikvision stock is sourced from authorised Australian distributors and shipped promptly from our local warehouse. No delays, no grey-market risks, no international return hassles.
- Industry-Wide Trust
Our clients range from councils and schools to enterprise businesses and security professionals — all trusting us for exceptional service, product reliability, and expert advice.
- Real-World Security Expertise
Unlike generic electronics stores, we specialise in security. Our team includes qualified installers and consultants offering tailored recommendations based on real-world experience — not just inventory lists.
- 3 Years Manufacturer Warranty ensuring your security system remains reliable for years to come.
At SecurityWholesalers.com.au, we’re committed to more than just competitive pricing — we offer true partnership and protection through every stage of your Hikvision journey. We’re not your average security equipment supplier — choose the team that industry professionals trust.
