The Hikvision DS‑2XC6685G0(D) is tailored for surveillance in tough marine, industrial, and coastal environments:
Rugged & Corrosion‑Resistant Build
Constructed with 316L stainless steel and certified NEMA 4X (C5‑M), it resists salt spray (720 hours) and condensation (480 hours), ensuring long service life in chemical plants, offshore rigs, coastal ports, and wastewater facilities.
Premium Image Quality
Equipped with a 1/2″ Progressive Scan CMOS sensor, the camera captures sharp 4K (3840×2160) resolution at 30 fps. It supports ultra-low illumination (0.002 Lux, down to 0 Lux with IR), WDR 120 dB, and 3D DNR for clear imaging in challenging light.
Flexible Optics
Choose between 2.8–12 mm or 8–32 mm motorised varifocal lenses, offering horizontal fields of view from approximately 95° to 15°. Ideal for wide-area coverage or distant detail monitoring.
Lens Maintenance & Protection
The integrated wiper clears debris from the glass, preserving image clarity in rain, salt sprays, or dusty settings. Combined with IP67 sealing, this delivers unmatched reliability in extreme conditions.
Efficient Encoding & Network Integration
Advanced codecs (H.265+/H.265/H.264+) reduce storage and bandwidth use. The camera supports PoE (802.3at) or 24 VAC power, onboard MicroSD card storage (up to 256 GB), and is compatible with Hikvision software platforms.
Environmental Resilience
-
Operates from –30 °C to 60 °C, humidity up to 95% non-condensing
-
EMC and safety certifications (CE, FCC, RCM, UL, CB, IC) suitable for industrial standards
Typical Deployments:
-
Coastal installations: Surveillance of ports, docks, and shipping infrastructure with exposure to salt air.
-
Chemical/petrochemical plants: Monitors zones with aggressive chemicals and high humidity.
-
Wastewater & sewage facilities: Performs reliably in damp, corrosive conditions.
-
Marine structures: Integrates into offshore platforms or seawater-exposed environments.
-
Industrial plants: Ideal for heavy industry, power generation, and mining environments.
⚙️ Technical Highlights
| Specification |
Detail |
| Sensor |
1/2″ Progressive Scan CMOS |
| Resolution |
8 MP (3840×2160) @ 30 fps |
| Lens |
Motorised varifocal 2.8–12 mm or 8–32 mm, F1.4 |
| Night Vision |
Up to 150 m IR @ 850 nm |
| Protection |
IP67, 316L stainless steel, built-in wiper |
| Encoding |
H.265+, H.265, H.264+, H.264, MJPEG |
| Power |
PoE 802.3at (max 24 W), or 24 VAC (23.5 W) |
| Storage |
MicroSD up to 256 GB |
| Ambient Range |
–30 °C to +60 °C, humidity ≤ 95% |
| Size & Weight |
472×204×180 mm; approx. 9.1 kg |
| Certifications |
NEMA 4X, CE, FCC, RCM, UL, CB, IC |
Summary:
The DS‑2XC6685G0(D) bullet camera excels in environments that demand sturdy corrosion protection, crystal-clear imaging, and dependable operation—far surpassing standard outdoor cameras in durability and performance.
Hikvision Warranty
3-Year Manufacturer Warranty
All Hikvision IP cameras and recording devices (NVRs/DVRs) are covered by a
3-year back-to-base manufacturer warranty.
Note: Disk drives are limited to a 1-year warranty.
Our warranty is limited to the replacement of faulty items or parts
and does not include damage caused by incorrect fitting of parts or accessories.
(a) Australian Consumer Law (ACL)
Certain legislation, including the Australian Consumer Law (ACL) in the
Competition and Consumer Act 2010 (Cth), and similar consumer protection
laws and regulations may confer you with rights, warranties, guarantees, and remedies
relating to the provision of goods or services to you by us via the Site which cannot
be excluded, restricted, or modified. Our liability is governed solely by the ACL and
these Terms.
(b) Goods
If you are a consumer as defined in the ACL, the following notice applies to you:
“Our goods come with warranties and guarantees that cannot be excluded under the
Australian Consumer Law (Consumer Guarantees). You are entitled to a replacement or
a refund for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major
failure.”
(c) Our Warranties
To the extent permitted by law, we exclude all express and implied warranties,
and all material and work is provided to you without warranties of any kind,
either express or implied. We expressly disclaim all warranties including but
not limited to implied warranties of merchantability and fitness for a particular
purpose.
(d) Manufacturer Warranties
Certain products, including particular models of IP security cameras and DVR/NVR
equipment, may come with a manufacturer’s warranty. The manufacturer’s warranty is
in addition to but may overlap with any rights and remedies you may have under
applicable law, including any Consumer Guarantees. If you are not considered a
“consumer” within the meaning of the ACL, the manufacturer’s warranty may be your
sole remedy. Many manufacturers’ warranties do not apply in a business or commercial
setting. Please contact the manufacturer if you would like to make a claim under
the manufacturer’s warranty.
(e) Repair, Replacement, or a Refund
If you wish to seek repair, replacement, or a refund for a product, please
contact us and we will explain the requirements to you. This may include you
providing evidence of the faulty product to us.
(f) Refund
You are not entitled to a refund for change of mind. If you are entitled to a
refund, we will only provide it once evidence of the faulty product is received
by us, or once we have received the product at our warehouse and inspected it
to assess whether it is eligible for a refund under these Terms. Any refund we
make will be by the same payment method used to purchase the product.
(g) Installed Products
Subject to this clause, we will not accept for return any product that has been
used, connected, installed, attempted to be connected or installed, or if your
product is custom-made or is a special buy product.
(h) Packaging
You must adequately package any product you are returning for our collection
to ensure that it is not damaged during return delivery to our warehouse. You
are also responsible for arranging the return delivery and the costs involved.
(i) Duty of Care
You have a duty of care for the product while it is in your possession. If
you damage products and then subsequently return them, you may be liable to pay
to repair the product to its original condition. In these circumstances, where
a repair is not economically viable, no refund will be made.
For more terms & conditions, please visit www.securitywholesalers.com.au/terms-and-conditions
